स्टकमा उपलब्ध लोकप्रिय उत्पादन
UHLC2CE
UHLC2CE HL-C2CE PANASONIC Control unite HL-C2, low resolution, -5 to +5V, 4-20mA, NPN-type
$0.00USD
3104 स्टकमा
मुख्य विशिष्टताहरू
वस्तु:Specifications
तौल:450 g approx.
विवरणहरू:Controller
उत्पादन:Ultra High-speed High-precision Laser Displacement Sensor
आपूर्तिकर्ता जानकारी
PANASONIC
उत्पादहरू: 4316
सामान्यतया २-३ कार्यदिवसभित्र पठाइन्छ
गुणस्तर ग्यारेन्टी
छिटो शिपिङ
प्राविधिक सहयोग
प्राविधिक विशिष्टताहरू
| प्यारामीटर | मूल्य |
|---|---|
| वस्तु | Specifications |
| तौल | 450 g approx. |
| विवरणहरू | Controller |
| उत्पादन | Ultra High-speed High-precision Laser Displacement Sensor |
| सामाग्री | Case: Polycarbonate |
| सहायक उपकरण | USB cable (2 m 6.562 ft long): 1 pc.Short bracket: 1 pc. |
| भाग नम्बर | HL-C2CE |
| इनपुट रिसेट गर्नुहोस् | Reset is done when connected to Common (-).Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| अलार्म आउटपुट | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less[between alarm output and Common(-)]- Residual voltage: 1 V or less(at 100 mA sink current) |
| उत्पादनको नाम | Ultra High-speed・High-precision Laser Displacement Sensor HL-C2 |
| समय इनपुट | ON at/during connection to Common (-)(depending on analysis mode)Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| नमुना लिने दर | 10 micro s, 20 micro s, 40 micro s, 100 micro s, 200 micro s, 400 micro s, 1 ms, 2 ms |
| स्ट्रोब आउटपुट | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less[between strobe output to Common(-)]- Residual voltage: 1 V or less(at 100 mA sink current) |
| उत्पादन नम्बर | HL-C2CE |
| आपूर्ति भोल्टेज | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| शून्य सेट इनपुट | Zero set is ON when connected with Common (-).Zero set turns to OFF after continuously connected to Common (-) for one second.Applied voltage: 30 V DC or less (Leak current: 0.1 mA or less) |
| सूचक: पावर | Green LED (lights up at power on) |
| हालको खपत | 500 mA approx. at 2 sensor heads connected350 mA approx. at 1 sensor head connected(100 mA approx. is additionally required when the mini console is connected) |
| सूचक: अलार्म १ | Red LED (lights up when OUT1 can not be measured due to insufficient amount of light) |
| सूचक: अलार्म २ | Red LED (lights up when OUT2 can not be measured due to insufficient amount of light) |
| लेजर नियन्त्रण इनपुट | Laser emission is stopped when connected to Common (-).Laser is emitted immediately after opened.Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| मेमोरी परिवर्तन इनपुट | Memory is specified when connected to Common (-).Applied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| कनेक्टेल सेन्सर हेड | Number of connectable units: Max. 2 units. |
| रिमोट इन्टरलक इनपुट | Laser emission is delayed when connected to Common (-).Laser emission stop at openApplied voltage: 30 V DC or less(Leak current: 0.1 mA or less) |
| एनालग आउटपुट: वर्तमान | Current output scale: 4 to 20 mA/F.S (initial value)Output range during normal status: 2 to 24 mAOutput at abnormal status: 1 mA or 25 mAResolution: 3 micro A, Linearity plus or minus 0.05% F.S.Load impedance: 250 Ohm max., Response delay time: 10 micro s approx.(Note) The linearity is F.S.=16 mA to digital measurement value. Response delay time is the period after update of measurement value. |
| एनालग आउटपुट: भोल्टेज | Voltage output scale: -5 to +5 V/F.S (initial value)Output range during normal status: -10.0 to +10.0 VOutput at abnormal status: -10.8 V or +10.8 VResolution: 2 mV, Linearity: plus or minus 0.05 % F.S.Max. 2 mA, output impedance 50 Ohm , Response delay time: 1.5 micro s/V approx.(Note) The linearity is F.S.=20 V to digital measurement value. Response delay time is the period after update of measurement value. |
| निर्णय आउटपुट (HI, GO, LO) | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less[between judgment output to Common(-)]- Residual voltage: 1 V or less(at 100 mA sink current) |
| अलार्म आउटपुट: आउटपुट सञ्चालन | Opened when the amount of light is insufficient |
| स्ट्रोब आउटपुट: आउटपुट सञ्चालन | Opened at data determination |
| अलार्म आउटपुट: सर्ट-सर्किट सुरक्षा | Incorporated |
| स्ट्रोब आउटपुट: सर्ट-सर्किट सुरक्षा | Incorporated |
| सूचक: सेन्सर हेड A लेजर विकिरण | Green LED (lights up during or immediately before laser emission of sensor head A) |
| सूचक: सेन्सर हेड B लेजर विकिरण | Green LED (lights up during or immediately before laser emission of sensor head B) |
| वातावरणीय प्रतिरोध: परिवेशको आर्द्रता | 35 to 85 %RH |
| वातावरणीय प्रतिरोध: झट्का प्रतिरोध | 196 m/s2 acceleration (20 G approx.) in X,Y and Z directions for three times each |
| वातावरणीय प्रतिरोध: परिवेशको तापक्रम | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| जजमेन्ट आउटपुट (HI, GO, LO): आउटपुट अपरेशन | Opened at output operation |
| वातावरणीय प्रतिरोध: कम्पन प्रतिरोध | 10 to 55 Hz frequency (period: 1 min.), 0.75 mm 0.030 in amplitude in X, Y and Z directions for 30 min. each |
| जजमेन्ट आउटपुट (HI, GO, LO): सर्ट-सर्किट सुरक्षा | Incorporated |
उत्पादन विवरण
High performance analog laser low resolution controller, HL-C2 series, RS232 port, analog output ±5V/ 4 - 20mA, NPN digital output
मुख्य विशेषताहरू
- औद्योगिक स्तरको गुणस्तर
- RoHS अनुरूप
- सीई प्रमाणित
- १-वर्षीय वारंटी
उत्पादन कागजातहरू
डेटासिट
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
प्रयोगकर्ता म्यानुअल
स्थापना र सञ्चालन मार्गनिर्देश
