स्टकमा उपलब्ध लोकप्रिय उत्पादन
UHGTC101P
UHGTC101P HG-TC101-P PANASONIC HG-T Laser Sensor Displacement. Master controller high-functionality, PNP out..
$0.00USD
4704 स्टकमा
मुख्य विशिष्टताहरू
:When communication unitis connected
वस्तु:Specifications
केबल:0.2 mm22-core (brown and blue lead wires) / 0.15 mm27-core composite cable, 2 m6.562 ftlong
विवरणहरू:Master unit / High performance type
आपूर्तिकर्ता जानकारी
PANASONIC
उत्पादहरू: 4316
सामान्यतया २-३ कार्यदिवसभित्र पठाइन्छ
गुणस्तर ग्यारेन्टी
छिटो शिपिङ
प्राविधिक सहयोग
प्राविधिक विशिष्टताहरू
| प्यारामीटर | मूल्य |
|---|---|
| When communication unitis connected | |
| वस्तु | Specifications |
| केबल | 0.2 mm22-core (brown and blue lead wires) / 0.15 mm27-core composite cable, 2 m6.562 ftlong |
| विवरणहरू | Master unit / High performance type |
| उत्पादन | Controller |
| सामाग्री | Case: Polycarbonate, Cover: Polycarbonate, Switches: Polyacetal |
| खुद तौल | 140 g approx. |
| भाग नम्बर | HG-TC101-P |
| १ देखि ७ युनिट | 1 to 6 units |
| उत्पादनको नाम | Thru-beam Type Digital Displacement Sensor HG-T |
| ८ देखि १५ युनिट | 7 to 14 units |
| प्रदर्शन दायरा | -199.999 to 199.999 mm-7.874 to 7.874 in |
| नमुना लिने दर | 1 ms (standard sampling) / 0.5 ms (high-speed sampling) |
| उत्पादन नम्बर | HG-TC101-P |
| आपूर्ति भोल्टेज | 24 V DC ±10 %, including ripple 0.5 V (P-P) |
| प्रदूषणको डिग्री | 2 |
| डिस्प्ले रिजोल्युसन | 1 μm0.039 mil |
| सञ्चालन उचाइ | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| हालको खपत | 100 mA or less (when sensor head is connected)(Note) : Current consumption does not include analog current output. |
| नियामक अनुपालन | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| लागू हुने सेन्सर हेड | HG-T1010、HG-T1110 |
| बाह्य इनपुट स्विचिङ | Input 1, Input 2, and Input 3 can be switched to "Preset / Reset / Trigger", "Bank Input A / Bank Input B / Select (Preset, Reset, Trigger)", or "Laser emission stop". |
| बाह्य आउटपुट स्विचिङ | Output 1, Output 2, and Output 3 can be switched to 3-value, 2-value, Logic, and Logic 2. |
| औसत गणना (प्रतिक्रिया समय) | 1 time (2 ms), 2 times (3 ms), 4 times (5 ms), 8 times (9 ms), 16 times (17 ms), 32 times (33 ms), 64 times (65 ms), 128 times (129 ms), 256 times (257 ms), 512 times (513 ms), and 1,024 times (1,025 ms) switching type(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling). |
| जडान गरिएका स्लेभ एकाइहरूको संख्या | Maximum sink current and sourcecurrent of control output |
| हस्तक्षेप रोकथाम कार्य | Incorporated(Note) : This function operates for each set of 4 connected controllers. |
| वातावरणीय प्रतिरोध: संरक्षण | IP40(IEC) |
| एनालग आउटपुट: एनालग करेन्ट आउटपुट | •Current output range: 4 to 20 mA/F.S. (default value)•Linearity: ±0.25 % F.S.•Output when alarm occurs: 0 mA•Load impedance: 250 Ω max.(Note) : Linearity is a value calculated from digitally measured values at F.S. = 16 mA for current output or F.S. = 4 V for voltage output. |
| एनालग आउटपुट: एनालग भोल्टेज आउटपुट | •Voltage output range: 1 to 5 V/F.S. (default value)•Linearity: ±0.05 % F.S.•Output when alarm occurs: 5.2 V•Output impedance: 100 Ω max.(Note) : Linearity is a value calculated from digitally measured values at F.S. = 16 mA for current output or F.S. = 4 V for voltage output. |
| बाह्य इनपुट (इनपुट १, इनपुट २, इनपुट ३) | Non-contact input or NPN open-collector transistor•Input conditionsInvalid: +8 V to +V DC or open, Valid: 0 to +1.2 V DC•Input impedance: 10 kΩ approx.Non-contact input or PNP open-collector transistor•Input conditionsInvalid: 0 to +0.6 V DC or open, Valid: +4 V to +V DC•Input impedance: 10 kΩ approx. |
| जडान गर्न मिल्ने नियन्त्रकहरूको अधिकतम संख्या | Up to 15 slave units can be connected to a master unit.(Note) : When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit. |
| वातावरणीय प्रतिरोध: परिवेशको आर्द्रता | 35 to 85 % RH, Storage: 35 to 85 % RH |
| वातावरणीय प्रतिरोध: झट्का प्रतिरोध | 98m/s2acceleration (10 G approx.) in X, Y and Z directions five times each |
| आउटपुट नियन्त्रण गर्नुहोस् (आउटपुट १, आउटपुट २, आउटपुट ३) | NPN open-collector transistor•Maximum sink current: 50 mA (Note)•Applied voltage: 30 V DC or less (between output and 0 V)•Residual voltage: 1.5 V or less (at 50 mA sink current)•Leakage current: 0.1 mA or lessPNP open-collector transistor•Maximum source current: 50 mA (Note)•Applied voltage: 30 V DC or less (between output and +V)•Residual voltage: 1.5 V or less (at 50 mA source current)•Leakage current: 0.1 mA or less(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.Number of connected slave unitsMaximum sink current and sourcecurrent of control outputAmbient temperatureWhen communication unitis connected1 to 7 units1 to 6 units20 mA-10～+45℃+14 to +113 ℉8 to 15 units7 to 14 units10 mA |
| वातावरणीय प्रतिरोध: परिवेशको तापक्रम | -10 to +50 ℃+14 to +122 ℉(No dew condensation or icing allowed) (Note), Storage: -20 to +60 ℃-4 to +140 ℉(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.Number of connected slave unitsMaximum sink current and sourcecurrent of control outputAmbient temperatureWhen communication unitis connected1 to 7 units1 to 6 units20 mA-10～+45℃+14 to +113 ℉8 to 15 units7 to 14 units10 mA |
| वातावरणीय प्रतिरोध: कम्पन प्रतिरोध | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude (10 to 58 Hz), Maximum acceleration 49 m/s2(58 to 150 Hz) in X, Y and Z directions for two hours each |
| वातावरणीय प्रतिरोध: इन्सुलेशन प्रतिरोध | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| वातावरणीय प्रतिरोध: भोल्टेज सहनशीलता | 1,000 V AC for one minute between all supply terminals connected together and enclosure |
| बाह्य इनपुट (इनपुट १, इनपुट २, इनपुट ३): इनपुट समय | • Trigger input: 2 ms or more (ON)• Laser emission stop input, preset input, reset input, bank input A/B(Note): 20 ms or more (ON)(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling). |
| नियन्त्रण आउटपुट (आउटपुट १, आउटपुट २, आउटपुट ३): अलार्म आउटपुट | Open when alarm occurs |
| नियन्त्रण आउटपुट (आउटपुट १, आउटपुट २, आउटपुट ३): जजमेन्ट आउटपुट | N.O. / N.C. switching type |
| नियन्त्रण आउटपुट (आउटपुट १, आउटपुट २, आउटपुट ३): सर्ट-सर्किट सुरक्षा | Incorporated (automatic reset type) |
उत्पादन विवरण
HG-T Laser Displacement Sensor. High Functionality Master Controller, PNP Output
मुख्य विशेषताहरू
- औद्योगिक स्तरको गुणस्तर
- RoHS अनुरूप
- सीई प्रमाणित
- १-वर्षीय वारंटी
उत्पादन कागजातहरू
डेटासिट
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
प्रयोगकर्ता म्यानुअल
स्थापना र सञ्चालन मार्गनिर्देश
