सेवा समय: सोमबार देखि शुक्रबार ९:००-१८:००
UHLAC1P - UHLAC1P HLAC1P HL-AC1P PANASONIC HL-T1 sensor controller PNP, 12-24VDC
स्टकमा उपलब्ध लोकप्रिय उत्पादन

UHLAC1P

UHLAC1P HLAC1P HL-AC1P PANASONIC HL-T1 sensor controller PNP, 12-24VDC

$0.00USD
4344 स्टकमा
मुख्य विशिष्टताहरू
वस्तु:Specifications
प्रकारहरू:PNP output
तौल:Net weight: 140 g approx.
विवरणहरू:Controller (PNP output)
आपूर्तिकर्ता जानकारी
PANASONIC
PANASONIC
उत्पादहरू: 4316
सामान्यतया २-३ कार्यदिवसभित्र पठाइन्छ
गुणस्तर ग्यारेन्टी
छिटो शिपिङ
प्राविधिक सहयोग

प्राविधिक विशिष्टताहरू

प्यारामीटरमूल्य
वस्तुSpecifications
प्रकारहरूPNP output
तौलNet weight: 140 g approx.
विवरणहरूController (PNP output)
उत्पादनUltra-compact Laser Collimated Beam Sensor
सामाग्रीEnclosure: Polybutylene terephthalateTransparent cover: Polycarbonate
I/O केबल0.09 mm210-core composite cable, 2 m6.562 ftlong
भाग नम्बरHL-AC1P
इनपुट रिसेट गर्नुहोस्+V connection: EffectiveOpen: Ineffective-Applied voltage: 30 V DC or less (leak current: 0.1 mA or less)
उत्पादनको नामUltra-compact Laser Collimated Beam Sensor HL-T1
समय इनपुट+V connection: EffectiveOpen: Ineffective-Applied voltage: 30 V DC or less (leak current: 0.1 mA or less)
रेखीय आउटपुटCurrent / voltage output switchable (Note)-During current output: 4 to 20 mA/F.S., Maximum load resistance: 300 Ohm-During voltage output: plus or minus 4 V/F.S., Output impedance 100 Ohm(In the monitor focus function, it can also be set at plus or minus 5 V, 0 to 5 V, etc.)(Note) Switching between current and voltage is accomplished by a switch on the bottom of the controller.
मुख्य कार्यहरू・Measured value display・Setting value, light amount value resolution display・Standard received light setting・Automatic scaling・Scaling・Display reverse・ECO display・Display digits limitation・Sample hold・Peak hold・Bottom hold・Peak to peak hold・Self peak hold・Self bottom hold・Zero reset・Initial reset・ON-delay timer・OFF-delay timer・One-shot timer・Differentiation・Sensitivity selection・Threshold value direct setting・Positioning teaching・2-point teaching・Automatic teaching・Hysteresis width variability・Monitor focus・Non-measuring time setting・(A – B) calculation(Note:The calculation unit is necessary.)・(A + B) calculation(Note:The calculation unit is necessary.)・Mutual interference prevention (Note:The calculation unit is necessary.)・Laser deterioration detection・Key lock・Zero reset memory
उत्पादन नम्बरHL-AC1P
आपूर्ति भोल्टेज12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
लेजर अफ इनपुट+V connection: Laser emission haltOpen: Laser emission-Applied voltage: 30 V DC or less (leak current: 0.1 mA or less)
मापन चक्र150 micro s
प्रदूषणको डिग्री3 (industrial environment)
शून्य रिसेट इनपुट+V connection: Zero reset operatesOpen: Zero reset ineffective-Applied voltage: 30 V DC or less (leak current: 0.1 mA or less)
हालको खपत190 mA or less (when connected to the sensor head)
I/O केबल एक्सटेन्सनExtension up to total 10 m32.808 ftis possible, with 0.09 mm2or more, cable.(Note) If the extension cable is longer than 10 m32.808 ft, then it will not qualify for CE marking.
सब-डिजिटल डिस्प्ले5 digit yellow LED display[RUN mode: Either the resolution or laser beam reception amount will be displayed. THR mode: The threshold value will be displayed., Reverse mode: The display orientation will be reversed.]
मुख्य डिजिटल डिस्प्ले5 digit red LED display[RUN mode: Either the measured value (mm) or the hold value will be displayed. Reverse mode: The display orientation will be reversed.]
इन्सुलेशन प्रतिरोध20 MOhm , or more, with 500 V DC megger between all supply terminals connected together and enclosure
लागू हुने सेन्सर हेडHL-T1001A/T1001F, HL-T1005A/T1005F, HL-T1010A/T1010F
भोल्टेज सहनशीलता1,000 V AC for one min. between all supply terminals connected together and enclosure
सूचकहरू: सक्षम गर्नुहोस् (सक्षम गर्नुहोस्)Green LED (lights up during normal operation)
सूचकहरू: निर्णय आउटपुटहरूHIGH: Orange LED (lights up when measured value > HIGH threshold value)PASS: Green LED (lights up when HIGH threshold value >= measured value >= LOW threshold value)LOW: Yellow LED (lights up when LOW threshold value > measured value)
सूचकहरू: शून्य रिसेट (शून्य)Green LED (lights up when the zero reset function is enabled)
सेटेबल औसत नमूना दर1 / 2 / 4 / 8 / 16 / 32 / 64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096(Note) The judgment output and linear output and linear output response time is calculated by (Measuring cycle) x (Set average sampling rate + 1).
सीई मार्किंग निर्देशन अनुपालनEMC Directive, RoHS Directive
निर्णय आउटपुट (उच्च, पास, कम)PNP open-collector transistor-Maximum source current: 50 mA-Applied voltage: 30 V DC or less (between judgment output and +V)-Residual voltage: 2 V or less (at 50 mA source current)
सूचकहरू: लेजर उत्सर्जन (LD ON)Green LED (lights up during laser emission)
वातावरणीय प्रतिरोध: परिवेशको आर्द्रता35 to 85 % RH, Storage: 35 to 85 % RH
वातावरणीय प्रतिरोध: झट्का प्रतिरोध300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each
रेखीय आउटपुट: तापक्रम विशेषताहरूplus or minus 0.2 % F.S./℃(Note) These are the temperature characteristics of the linear output when the sensor head is connected.
वातावरणीय प्रतिरोध: परिवेशको तापक्रम0 to +50 ℃+32 to +122 ℉(No dew condensation allowed), Storage: -25 to +65 ℃-13 to +149 ℉
वातावरणीय प्रतिरोध: कम्पन प्रतिरोध10 to 150 Hz frequency, 0.7 mm0.028 indouble amplitude in X, Y and Z directions for 80 min.
निर्णय आउटपुट (उच्च, पास, कम): आउटपुट सञ्चालनHIGH: ON when measured value > HIGH threshold valuePASS: ON when HIGH threshold value >= measured value >= LOW threshold valueLOW: ON when LOW threshold value > measured value
निर्णय आउटपुटहरू (उच्च, पास, कम): आउटपुटहरूको संख्याHIGH / PASS / LOW 3 values output
निर्णय आउटपुट (उच्च, पास, कम): उपयोगिता श्रेणीDC-12 or DC-13
जजमेन्ट आउटपुट (उच्च, पास, कम): सर्ट-सर्किट सुरक्षाIncorporated

उत्पादन विवरण

HLT1 series controller, 12-24 VDC power, PNP digital output, selectable analog output between 4-20mA and ±4V
मुख्य विशेषताहरू
  • औद्योगिक स्तरको गुणस्तर
  • RoHS अनुरूप
  • सीई प्रमाणित
  • १-वर्षीय वारंटी

उत्पादन कागजातहरू

डेटासिट

प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा

प्रयोगकर्ता म्यानुअल

स्थापना र सञ्चालन मार्गनिर्देश

Top