स्टकमा उपलब्ध लोकप्रिय उत्पादन
UHGS1110AC
UHGS1110AC HG-S1110-AC PANASONIC HG-S Sensor for measurement by contact. Head sensor with pneumatic actuator..
$0.00USD
4607 स्टकमा
मुख्य विशिष्टताहरू
वस्तु:Specifications
टिप्पणी:Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃+68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment.
झट्का:10.5 mm0.413 inor more(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point.
तौल:Net weight: 80 g approx.
आपूर्तिकर्ता जानकारी
PANASONIC
उत्पादहरू: 4316
सामान्यतया २-३ कार्यदिवसभित्र पठाइन्छ
गुणस्तर ग्यारेन्टी
छिटो शिपिङ
प्राविधिक सहयोग
प्राविधिक विशिष्टताहरू
| प्यारामीटर | मूल्य |
|---|---|
| वस्तु | Specifications |
| टिप्पणी | Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃+68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment. |
| झट्का | 10.5 mm0.413 inor more(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point. |
| तौल | Net weight: 80 g approx. |
| विवरणहरू | Air-driven type10 mm0.394 intype High precision |
| उत्पादन | Contact-Type Digital Displacement Sensor |
| सामाग्री | Body: Zinc, Holder: Stainless steel, Spindle: Tool steel, Probe (Note): Brass (body) / Ceramic (ball),, Air tube clamp: S60CM(Note) : The probe is also available as an option. |
| सहायक उपकरण | Sensor head fastening wrench: 1 pc., Mounting nut: 1 pc., Seal cap: 1pc, Air tube clamp: 1 pc. |
| रिजोल्युसन | 0.1 μm0.004 mil |
| भाग नम्बर | HG-S1110-AC |
| उत्पादनको नाम | Contact-Type Digital Displacement Sensor HG-S |
| प्रयोग गर्न मिल्ने तरल पदार्थ | Clean air (Dew point temperature: -10 ℃+14 ℉or less) |
| नमुना लिने दर | 1 ms |
| उत्पादन नम्बर | HG-S1110-AC |
| लागू हुने ट्यूब | Outside diameter: ø4 mmø0.157 in/ Inside diameter: ø2.5 mmø0.098 in |
| बल मापन गर्ने | ・Measuring force changes with the air pressure used. Removing the seal cap enables the product to be used as the low measuring force type.・For the relationship between supplied air pressure and measuring force or between measuring force and pushed spindle position, see the figures below. For upward mount without a seal cap, subtract 0.2 N from the measuring force. For side mount, subtract 0.1 N from the measuring force. The following figures are only typical examples, and these relationships differ depending on the assembly accuracy of the product or the abrasion status of sealing materials. |
| मापन दायरा | 10 mm0.394 in(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point. |
| ग्राउन्डिङ विधि | Capacitor grounding |
| प्रदूषणको डिग्री | 2 |
| हट स्वाप प्रकार्य | Incorporated |
| सञ्चालन उचाइ | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| सञ्चालन सूचक | Equipped (2-color LED: Orange / Green) |
| टिप विचलन मात्रा | 35 μm1.378 mil(typical value) |
| लागू हुने नियन्त्रक | HG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113(Note) : Be sure to use the sensor in combination with an HG-SC□ controller manufactured in or after February 2019. |
| इन्सुलेशन प्रतिरोध | 100 MΩ or more at 250 V DC |
| नियामक अनुपालन | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| काम गर्ने चापको दायरा | 0.14 to 0.16 MPaWith no seal cap mounted : 0.035 to 0.045 MPa |
| संकेत शुद्धता (PP) | Full range: 1.0 μm0.039 milor lessLimited range: 0.5 μm0.02 milor less(any 60 μm2.362 mil) |
| स्थिति पत्ता लगाउने विधि | Optical absolute linear encoder method |
| दबाब प्रतिरोध गर्ने क्षमता | 0.2 MPa |
| वातावरणीय प्रतिरोध: संरक्षण | IP67 (IEC)With no seal cap mounted : -(Note) : Protective structure is not applicable when the sealing portions have deteriorated or become damaged. The protection level is zero when the seal cap is removed. |
| वातावरणीय प्रतिरोध: परिवेशको आर्द्रता | 35 to 85 % RH, Storage: 35 to 85 % RH |
| वातावरणीय प्रतिरोध: झट्का प्रतिरोध | 1,960 m/s2acceleration in X, Y, and Z directions three times each |
| वातावरणीय प्रतिरोध: परिवेशको तापक्रम | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +60 ℃-4 to +140 ℉ |
| वातावरणीय प्रतिरोध: कम्पन प्रतिरोध | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (10 to 58 Hz), maximum acceleration 196 m/s2, (58 to 150 Hz) in X, Y, and Z directions for two hours each |
उत्पादन विवरण
HG-S - Contact measurement sensor. Sensor head with pneumatic actuator. Resolution 0.1μm. Precision 1μm. Range 10mm
मुख्य विशेषताहरू
- औद्योगिक स्तरको गुणस्तर
- RoHS अनुरूप
- सीई प्रमाणित
- १-वर्षीय वारंटी
उत्पादन कागजातहरू
डेटासिट
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
प्रयोगकर्ता म्यानुअल
स्थापना र सञ्चालन मार्गनिर्देश
