स्टकमा उपलब्ध लोकप्रिय उत्पादन
HLC1CM
HLC1CM HL-C1C-M PANASONIC Driver for connecting 2 sensor heads HL-C1 series
$0.00USD
3584 स्टकमा
मुख्य विशिष्टताहरू
वस्तु:Specifications
तौल:Net weight: 300 g approx.
विवरणहरू:Controller
उत्पादन:Ultra High-speed Laser Displacement Sensor [CCD Style]
आपूर्तिकर्ता जानकारी
PANASONIC
उत्पादहरू: 4316
सामान्यतया २-३ कार्यदिवसभित्र पठाइन्छ
गुणस्तर ग्यारेन्टी
छिटो शिपिङ
प्राविधिक सहयोग
प्राविधिक विशिष्टताहरू
| प्यारामीटर | मूल्य |
|---|---|
| वस्तु | Specifications |
| तौल | Net weight: 300 g approx. |
| विवरणहरू | Controller |
| उत्पादन | Ultra High-speed Laser Displacement Sensor [CCD Style] |
| सहायक उपकरण | - |
| भाग नम्बर | HL-C1C-M |
| अलार्म आउटपुट | Photo-MOS relay- Maximum load current: 50 mA- Applied voltage: 30 V DC or less (between alarm output and COM)- ON impedance: 35 Ohm or less- Operation time: Max. 2 ms |
| केबल लम्बाइ | Power line: Less than 10 m 32.808 ftSignal line: Less than 30 m 98.425 ft |
| उत्पादनको नाम | Ultra High-speed Laser Displacement Sensor HL-C1(Discontinued) |
| नमुना लिने दर | Selectable from 100 micro s / 144 micro s / 200 micro s / 255 micro s / 332 micro s / 498 micro s / 1,000 micro s |
| प्रकार्यहरू होल्ड गर्नुहोस् | Selectable from NORMAL / P-P / PEAK / VALLEY(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| उत्पादन नम्बर | HL-C1C-M |
| आपूर्ति भोल्टेज | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| डिजिटल फिल्टरहरू | High pass: OFF, 10 to 2,000 Hz (9 steps)Low pass: OFF, 10 to 2,000 Hz (9 steps)(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| सूचकहरू: अँध्यारो | Red LED (lights up upon disabled measurement due to insufficient light at sensor head 1 or 2) |
| शून्य सेट अन इनपुट | Zero set: ON when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input |
| क्यालिब्रेसन: स्प्यान | 0.9000 to 1.1000(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| शून्य सेट अफ इनपुट | Zero set: OFF when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input |
| क्यालिब्रेसन: सिफ्ट | plus or minus 20.0000 mm plus or minus 0.787 in(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| हालको खपत | When 1 sensor is connected: 430 mA approx.When 2 sensors are connected: 550 mA approx. |
| सूचकहरू: उज्यालो | Red LED (lights up upon disabled measurement due to excessive light at sensor head 1 or 2) |
| गणना कार्यहरू | L plus or minus KA, L plus or minus KB, L plus or minus K (A plus or minus B)A, B: Sensor head 1, Sensor head 2 measurement values, L = plus or minus 999.9999, K = 0.0001 to 99.9999(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| सिरियल इनपुट / आउटपुट | RS-232C |
| कनेक्टेल सेन्सर हेड | Maximum 2 sensor heads |
| एनालग आउटपुट: वर्तमान | Output current: 4 to 20 mA/F.S. [default setting when diffuse reflective mode is selected (Note 2)]Output range: 0 to 29.5 mA (maximum of 25 mA at max. load impedance)Load impedance: 250 Ohm or less(Note 1) The maximum analog output current will vary with load impedance.(Note 2) If specular reflective mode is selected, then the default setting is 5.6 to 18.4 mA/F.S. |
| एनालग आउटपुट: भोल्टेज | Output voltage: plus or minus 5 V/F.S. [default setting when diffuse reflective mode is selected (Note) ]Output range: -10.9 to +10.9 VOutput current: Max. 2 mA, Output impedance: 50 Ohm(Note) If specular reflective mode is selected, then the default setting is plus or minus 4 V/F.S. |
| नमूनाहरूको औसत संख्या | OFF, 2 to 32,768 times (16 steps)(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| निर्णय आउटपुटहरू (O1, O2) | Photo-MOS relay- Maximum load current: 50 mA- Applied voltage: 30 V DC or less (between judgment output and COM)- ON impedance: 35 Ohm or less- Operation time: Max. 2 ms |
| सूचकहरू: लेजर उत्सर्जन | Green LED (lights up during laser emission from sensor head 1 or sensor head 2, or immediately before laser emission) |
| तापक्रम विशेषताहरू | plus or minus 0.01 % F.S./degrees |
| समय इनपुट (लेजर उत्सर्जन) | Laser emission stops or continues when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input or there is an open circuit: determined based on input mode selection. |
| अलार्म आउटपुट: आउटपुट सञ्चालन | Opened when the amount of light is excessive or insufficient. |
| अलार्म आउटपुट: सर्ट-सर्किट सुरक्षा | Incorporated |
| वातावरणीय प्रतिरोध: परिवेशको आर्द्रता | 35 to 85 % RH, Storage: 35 to 85 % RH |
| वातावरणीय प्रतिरोध: झट्का प्रतिरोध | 196 m/s2 (20 G approx.) in X, Y and Z directions for 3 times each |
| जजमेन्ट आउटपुटहरू (O1, O2): आउटपुट सञ्चालन | Opened or closed when the threshold value is reached. Determined based on judgment output mode selection. (The threshold value varies with the hysteresis setting.) |
| वातावरणीय प्रतिरोध: परिवेशको तापक्रम | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| वातावरणीय प्रतिरोध: कम्पन प्रतिरोध | 10 to 55 Hz frequency (period: 1 min.) 0.75 mm 0.030 in amplitude in X,Y and Z directions for 30 min. each |
| निर्णय आउटपुट (O1, O2): उपयोगिता श्रेणी | DC-12 or DC-13 |
| जजमेन्ट आउटपुटहरू (O1, O2): सर्ट-सर्किट सुरक्षा | Incorporated |
उत्पादन विवरण
More details
मुख्य विशेषताहरू
- औद्योगिक स्तरको गुणस्तर
- RoHS अनुरूप
- सीई प्रमाणित
- १-वर्षीय वारंटी
उत्पादन कागजातहरू
डेटासिट
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
प्रयोगकर्ता म्यानुअल
स्थापना र सञ्चालन मार्गनिर्देश
