स्टकमा उपलब्ध लोकप्रिय उत्पादन
UST4A1J1
UST4A1J1 ST4-A1-J1 PANASONIC Safety, Thu-beam sensor, 15m, cable 1m
$0.00USD
3864 स्टकमा
मुख्य विशिष्टताहरू
वस्तु:Specifications
केबल:Shielded cable with connector, 1 m3.281 ftlong
विवरणहरू:Sensor head
उत्पादन:Compact Type 4 Safety Beam Sensor
आपूर्तिकर्ता जानकारी
PANASONIC
उत्पादहरू: 4316
सामान्यतया २-३ कार्यदिवसभित्र पठाइन्छ
गुणस्तर ग्यारेन्टी
छिटो शिपिङ
प्राविधिक सहयोग
प्राविधिक विशिष्टताहरू
| प्यारामीटर | मूल्य |
|---|---|
| वस्तु | Specifications |
| केबल | Shielded cable with connector, 1 m3.281 ftlong |
| विवरणहरू | Sensor head |
| उत्पादन | Compact Type 4 Safety Beam Sensor |
| सामाग्री | Enclosure: PBT (Polybutylene terephthalate)Lens: AcrylicIndicator cover: Acrylic |
| भाग नम्बर | ST4-A1-J1 |
| उत्पादनको नाम | Compact Type 4 Safety Beam Sensor ST4 |
| पावर भोल्टेज | Supplied from controller |
| उत्पादन नम्बर | ST4-A1-J1 |
| सेन्सिङ वस्तु | φ9 mmφ0.354 inor more opaque object |
| केबल एक्सटेन्सन | Extention up to total 50 m164.042 ftis possible for both emitter and receiver with exclusive cable. |
| सञ्चालन दायरा | 0.1 to 15 m0.328 to 49.213 ft(Note：The operating range is the possible setting distance between the emitter and the receiver. It can detect sensing object of less than 0.1 m 0.328 ft away.) |
| उत्सर्जन तत्व | Infrared LED (Peak emission wavelength: 870 nm0.034 mil) |
| परिवेश रोशनी | Incandescent lamp: 3,500 Lx or less at the light-receiving face |
| हालको खपत | Emitter: 11 mA or lessReceiver: 9 mA or less |
| लागू हुने मापदण्डहरू | IEC 61496-1/2 (JIS B 9704-1/2 / UL 61496-1/2) (Type 4), ISO 13849-1:2015 (Category 4, PLe), JIS B 9705-1 (Category 4), IEC 61508-1 to 3 (SIL3), IEC 62061 (SIL3), JIS C 0508-1 to 3 (SIL3), UL 1998, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA R15.06, ANSI/ISA S84.01 (SIL3)(Note) Complies with those standards only when the sensor head is used in combination with the controller ST4-C11 / ST4-C12EX. |
| बीम उत्सर्जन सूचक | Green LED (lights up during beam emission, lights off during emission halt) |
| प्रभावकारी एपर्चर कोण | plus or minus 2.5degrees or less for operating range exceeding 3 m 9.843 ft (required by IEC 61496-2 / UL 61496-2) |
| बिम अवरोध सूचक | Red LED (lights up when the beam is interrupted or lock out, lights off during reception)(Note) Shows light interruption information between the emitter and the receiver with the same address. It does not show OSSD output. |
| स्थिर घटना बीम सूचक | Green LED (lights up under stable light received condition, lights off under unstable light received condition) |
| सीई मार्किंग निर्देशन अनुपालन | Machinery Directive, EMC Directive, RoHS Directive |
| तौल (इमिटर र रिसीभरको कुल) | Net weight: 100 g approx.Gross weight: 140 g approx. |
| वातावरणीय प्रतिरोध: परिवेशको आर्द्रता | 30 to 85 % RH, Storage: 30 to 95 % RH |
| वातावरणीय प्रतिरोध: झट्का प्रतिरोध | 300 m/s2acceleration in X, Y and Z directions three times each |
| वातावरणीय प्रतिरोध: परिवेशको तापक्रम | －10 to +55 ℃+14 to +131℉(No dew condensation or icing allowed),Storage: －25 to +70 ℃－13 to +158℉ |
| वातावरणीय प्रतिरोध: सुरक्षाको डिग्री | IP67 (IEC) |
| वातावरणीय प्रतिरोध: कम्पन प्रतिरोध | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 90 m/s2 in X, Y and Z directions for two hours each< |
| वातावरणीय प्रतिरोध: इन्सुलेशन प्रतिरोध | 20 MOhm or more with 500V DC megger between all supply terminals connected together and enclosure |
| वातावरणीय प्रतिरोध: भोल्टेज सहनशीलता | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
उत्पादन विवरण
Category 4 safety barrier sensor head, independent beams, IP67, 0.1 to 15m, built-in 1m cable
मुख्य विशेषताहरू
- औद्योगिक स्तरको गुणस्तर
- RoHS अनुरूप
- सीई प्रमाणित
- १-वर्षीय वारंटी
उत्पादन कागजातहरू
डेटासिट
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
प्रयोगकर्ता म्यानुअल
स्थापना र सञ्चालन मार्गनिर्देश
