स्टकमा उपलब्ध लोकप्रिय उत्पादन
USFC21
USFC21 SF-C21 PANASONIC Safety control unit for safety light curtain and other safety products, 8 inputs 24V..
$0.00USD
4642 स्टकमा
मुख्य विशिष्टताहरू
वस्तु:Specifications
तौल:Net weight: 190 g approx.Gross weight: 320 g approx.
उत्पादन:Safety Control Unit
सामाग्री:Main unit enclosure: Polycarbonate / ABS polymer alloyEnclosure: Polycarbonate
आपूर्तिकर्ता जानकारी
PANASONIC
उत्पादहरू: 4316
सामान्यतया २-३ कार्यदिवसभित्र पठाइन्छ
गुणस्तर ग्यारेन्टी
छिटो शिपिङ
प्राविधिक सहयोग
प्राविधिक विशिष्टताहरू
| प्यारामीटर | मूल्य |
|---|---|
| वस्तु | Specifications |
| तौल | Net weight: 190 g approx.Gross weight: 320 g approx. |
| उत्पादन | Safety Control Unit |
| सामाग्री | Main unit enclosure: Polycarbonate / ABS polymer alloyEnclosure: Polycarbonate |
| पीएफएचडी/एमटीटीएफडी | 9.73 x 10−10/ 100 years or more |
| भाग नम्बर | SF-C21 |
| केबल लम्बाइ | 100 m328.084 ftor less |
| उत्पादनको नाम | Safety Control Unit SF-C21 |
| उत्पादन नम्बर | SF-C21 |
| प्रदूषणको डिग्री | 2 |
| जडान विधि | Input / output and power supply: Detachable spring cage termina l blocksRS-485: Detachable spring-cage terminal blockUSB: Mini-B male |
| सम्बन्धित मापदण्डहरू | IEC 60947-1, IEC 60947-5-1, IEC 60947-5-2, IEC 60947-5-5, IEC 60947-5-8, IEC 61496-1, IEC TS 62046, ISO 13851 |
| इन्टरलक प्रकार्य | Incorporated |
| सञ्चालन उचाइ | 2,000 m6561.680 ftor less(Note) Do not use or store this device in a pressurized environment beyond the atmospheric pressure at sea level. |
| कम्पन प्रतिरोध | 5 to 8.4 Hz frequency, 3.5 mm0.138 inhalf amplitude, 8.4 to 150 Hz frequency, Max. acceleration 9.8 m/s2(1 G), in X, Y and Z directions for two hours each (IEC / EN 60068-2-6) |
| तर्क सेटिङ प्रकार्य | Input mode, control mode, output mode, reset mode, auxiliary ou tput mode |
| अतिरिक्त भोल्टेज श्रेणी | II |
| सूचक आउटपुट म्युट गर्दै | Semiconductor photo MOS relay output x 1- Maximum load current: 60 mA- Supply voltage: Same as the voltage of the power supply for internal- Residual voltage: 2.5 V or less- Leakage current: 100 μA or less (Including power supply OFF condition) |
| लकआउट रिलीज प्रकार्य | Incorporated |
| तर्क चयन प्रकार्य | No.0: Customization controlNo.1: Overall stop controlNo.2: Parallel muting controlNo.3: Sequential muting controlNo.4: Partial stop control 1No.5: Partial stop control 2No.6: Two-hand controlNo.7: OR controlNo.8: Operation mode selection control |
| सुरक्षा इनपुट (IN1 देखि IN8) | 2 inputs x 4, Rated voltage: Same as the voltage of the power supply for internal |
| लागू हुने मापदण्डहरू: EMC | IEC 61000-6-2, IEC 61326-3-1, EN 55011 |
| पावर अन गरेपछि सुरु हुने समय | 2 sec. or less |
| लागू हुने मापदण्डहरू: सुरक्षा | IEC 61508-1 to 3, EN 61508-1 to 3 (SIL3), ISO 13849-1:2015 (Category 4, PLe), IEC 61131-2, IEC 61010-2-201, IEC 62061 (SILCL3), UL 61010-1, UL 61010-2-201, UL 1998 |
| नियन्त्रण आउटपुट (OUT1 देखि OUT4) | PNP open-collector transistor with 2 outputs x 2- Maximum source current: 300 mA / output- Applied voltage: Same as the voltage of the power supply for external- Residual voltage: 2.5 V or less- Leakage current: 100 μA or less (Including power supply OFF condition) |
| सञ्चार प्रकार्य (MODBUS RTU) | Interface: RS-485Protocol: MODBUS RTUMaximum transmission distance: 100 m328.084 ftMaximum number of units that can be connected: 8 units (slaves) |
| बाह्य उपकरण अनुगमन प्रकार्य | Incorporated |
| सुरक्षा इनपुट (IN1 देखि IN8): अन लेभल | Input voltage: 18 VInput current: 3.5 mA |
| सूचक आउटपुट म्युट गर्दै: आउटपुट मोड | ON when muting / override |
| सुरक्षा इनपुट (IN1 देखि IN8): अफ लेभल | Input voltage: 5 VInput current: 1.0 mA |
| म्युटिङ सूचक आउटपुट: प्रतिक्रिया समय | 10 ms or less |
| लागू हुने नियमहरू र प्रमाणपत्रहरू | CE Marking (Machinery Directive, EMC Directive, RoHS Directive), UKCA Marking [Supply of Machinery (Safety)Regulations, EMC Regulations, RoHS Regulations], TÜV SÜD certification, Korea's Radio Waves Act conformity registration |
| वातावरणीय प्रतिरोध: परिवेशको आर्द्रता | 30 to 85 % RH, Storage: 30 to 85 % RH |
| वातावरणीय प्रतिरोध: झट्का प्रतिरोध | 147 m/s2(15 G) 11 ms in X, Y and Z directions for three times each (IEC / EN 60068-2-27) |
| आपूर्ति भोल्टेज: बाह्यको लागि विद्युत आपूर्ति | 24 V DC+10-15% Ripple P-P10 % or less(Note) "Power supply for external" is the power supply for control output / auxiliary output. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| आपूर्ति भोल्टेज: आन्तरिक लागि विद्युत आपूर्ति | 24 V DC+10-15% Ripple P-P10 % or less(Note) "Power supply for internal" is the power supply for safety input. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| नियन्त्रण आउटपुट (OUT1 देखि OUT4): आउटपुट मोड | True: ONFalse: OFF |
| सुरक्षा इनपुट (IN1 देखि IN8): इनपुट प्रतिबाधा | 4.7 KΩ approx. |
| वातावरणीय प्रतिरोध: परिवेशको तापक्रम | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: -25 to +60 ℃-13 to +140 ℉ |
| नियन्त्रण आउटपुट (OUT1 देखि OUT4): प्रतिक्रिया समय | OFF response: 10 ms or lessON response: 100 ms or less |
| वातावरणीय प्रतिरोध: सुरक्षाको डिग्री | IP20 (IEC)(must be installed in a control panel with protectio n IP54 or higher) |
| वातावरणीय प्रतिरोध: इन्सुलेशन प्रतिरोध | 20 MΩ, or more, with 500 V DC megger(All inputs connected together - USB port, all inputs connected together - RS-485 port, USB port - RS-485 port, between all supply terminals connected together and enclosure, all outputs connected together - all input connected together, all outputs connected together - USB port, all outputs connected together - RS-485 port) |
| हालको खपत: बाह्यको लागि विद्युत आपूर्ति | 100 mA or less(Note) "Power supply for external" is the power supply for control output / auxiliary output. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| हालको खपत: आन्तरिक लागि विद्युत आपूर्ति | 200 mA or less(Note) "Power supply for internal" is the power supply for safety input. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| सुरक्षा इनपुट (IN1 देखि IN8): मूल्याङ्कन गरिएको इनपुट करेन्ट | 5 mA approx. |
| सहायक आउटपुट (AUX1 देखि AUX4) (गैर-सुरक्षा आउटपुट) | PNP open-collector transistor with 1 output x 4- Maximum source current: 60 mA / output- Applied voltage: Same as the voltage of the power supply for external- Residual voltage: 2.5 V or less- Leakage current: 100 μA or less (Including power supply OFF condition) |
| नियन्त्रण आउटपुट (OUT1 देखि OUT4): ढिलाइ प्रकार्यमा | Incorporated |
| वातावरणीय प्रतिरोध: भोल्टेज सहनशीलता | 1,000 V AC for one min.(All inputs connected together - USB port, all inputs connected together - RS-485 port, USB port - RS-485 port, between all supply terminals connected together and enclosure, all outputs connected together - all input connected together, all outputs connected together - USB port, all outputs connected together - RS-485 port) |
| नियन्त्रण आउटपुट (OUT1 देखि OUT4): ढिलाइ कार्य बन्द | Incorporated |
| सूचक आउटपुट म्युट गर्दै: सर्ट-सर्किट सुरक्षा | Incorporated |
| नियन्त्रण आउटपुट (OUT1 देखि OUT4): सर्ट-सर्किट सुरक्षा | Incorporated |
| सुरक्षा इनपुट (IN1 देखि IN8): पत्ता लगाउन सकिने ON अवस्थाको अवधि | 10 ms or more |
| सुरक्षा इनपुट (IN1 देखि IN8): पत्ता लगाउन नसकिने बन्द अवस्थाको अवधि | 0.7 ms or less |
| सहायक आउटपुट (AUX1 देखि AUX4) (गैर-सुरक्षा आउटपुट): प्रतिक्रिया समय | 10 ms or less |
| सहायक आउटपुट (AUX1 देखि AUX4) (गैर-सुरक्षा आउटपुट): सर्ट-सर्किट सुरक्षा | Incorporated |
| सहायक आउटपुट (AUX1 देखि AUX4) (गैर-सुरक्षा आउटपुट): आउटपुट मोड (फ्याक्ट्री पूर्वनिर्धारित) | AUX1: Negative logic of OUT1 / OUT2 (ON when OUT1 / OUT2 is OFF)AUX2: Negative logic of OUT3 / OUT4 (ON when OUT3 / OUT4 is OFF)AUX3: Reset trigger output (ON under reset release wait condition)AUX4: Lockout output (OFF when lockout) |
| सहायक आउटपुट (AUX1 देखि AUX4) (गैर-सुरक्षा आउटपुट): आउटपुट मोड (सफ्टवेयर उपकरण प्रयोग गरेर कुनै पनि सहायक आउटपुटहरू अनुकूलित गर्न सकिन्छ) | Negative logic of OUT1 / OUT2 (ON when OUT1 / OUT2 is OFF)Negative logic of OUT3 / OUT4 (ON when OUT3 / OUT4 is OFF)Positive logic of OUT1 / OUT2 (ON when OUT1 / OUT2 is ON)Positive logic of OUT3 / OUT4 (ON when OUT3 / OUT4 is ON)Outputs A, B, C, and D of diagnosis results of input blocks (ON when logic is true)Outputs E, F, and G of internal logic circuit diagnostic results (ON when logic is true)Reset trigger output (ON under reset release wait condition)Lockout output (OFF when lockout)Muting indicator output (ON when muting / override)Monitor output in response to IN1 to IN8 (ON when input)No output (normally OFF) |
उत्पादन विवरण
Control unit for barriers and other safety products, Cat. 4(Ple) and SIL3, 4 inputs, 2 outputs, 8 pre-established logics according to cat regulations. 4 (Ple) and 1 customizable logic, self-diagnostic
मुख्य विशेषताहरू
- औद्योगिक स्तरको गुणस्तर
- RoHS अनुरूप
- सीई प्रमाणित
- १-वर्षीय वारंटी
उत्पादन कागजातहरू
डेटासिट
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
प्रयोगकर्ता म्यानुअल
स्थापना र सञ्चालन मार्गनिर्देश
