


| प्यारामीटर | मूल्य |
|---|---|
| वस्तु | Specifications |
| पीएफएचडी | 1.9 × 10-9(Note) Probability of dangerous failure per hour. |
| केबल | 0.15 mm2(power line: 0.2 mm2) 12-core heat-resistant PVC cable with connector, 0.5 m 1.640 ft long |
| MTTFDLanguage | 100 years or more(Note) Mean time to dangerous failure. |
| विवरणहरू | Min. sensing object ø45 mmø1.772 in(40 mm1.575 inbeam pitch) |
| उत्पादन | Compact Safety Light Curtain[Type4 PLe SIL3] |
| सामाग्री | Enclosure: Polycarbonate |
| बिम पिच | 40 mm1.575 in |
| सामानहरू | - |
| भाग नम्बर | SF4B-A12CA-J05 |
| उत्पादनको नाम | Compact Safety Light Curtain[Type4 PLe SIL3] SF4B-C |
| ELCA प्रकार्य | Incorporated (reducing mutual interference automatically) |
| पावर भोल्टेज | 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| प्रतिक्रिया समय | OFF response: 14 ms or lessON response: 80 to 90 ms |
| उत्पादन नम्बर | SF4B-A12CA-J05 |
| केबल एक्सटेन्सन | Extension up to total 50 m164.042 ftis possible for both emitter and receiver optional mating cables |
| म्युट गर्ने प्रकार्य | Incorporated |
| सञ्चालन दायरा | 0.3 to 7m0.984 to 22.966 ft(Note) The operating range is the possible setting distance between the emitter and the receiver. |
| उत्सर्जन तत्व | Infrared LED (Peak emission wavelength: 850 nm0.033 mil) |
| प्रदूषणको डिग्री | 3 |
| प्रकार्य ओभरराइड गर्नुहोस् | Incorporated |
| सुरक्षात्मक उचाइ | 503.4 mm19.819 in |
| इन्टरलक प्रकार्य | Incorporated [Manual reset / Auto reset](Note) The manual reset and automatic reset are possible to be switched depending on the wiring status. |
| सञ्चालन उचाइ | 2,000 m6,561.68 ftor less(Note) Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m. |
| वैकल्पिक कार्यहरू | Muting setting changing, override setting changing, fixed blanking, floating blanking, light emitting amount control, auxiliary output switching, protecting, interlock setting changing, external relay monitor setting changing(Note) In case of using optional function, the handy-controller SFB-HC is required. |
| परिवेश रोशनी | Incandescent light: 3,500 liter x or less at the light-receiving face |
| न्यूनतम सेन्सिङ वस्तु | ø 45 mmø 1.772 inopaque object(Note) In case the blanking function is valid, the operation mode is changed. |
| बीम च्यानलहरूको संख्या | 12 |
| उत्सर्जन रोक्ने कार्य | Incorporated |
| सहायक आउटपुट म्युट गर्दै | NPN open-collector transistor• Maximum sink current: 100 mA• Applied voltage: Same as supply voltage (between the muting auxiliary output and 0 V)• Residual voltage: 2.5 V or less (sink current 100 mA, when using 20 m65.617 ftlength cable) |
| प्रभावकारी एपर्चर कोण | plus or minus 2.5℃ or less [for an operating range exceeding 3 m9.843 ft(conforming to IEC 61496-2 / ANSI/UL 61496-2) ] |
| लागू हुने मापदण्डहरू: जापान | JIS B 9704-1 / 2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 3 (SIL3) |
| लागू हुने मापदण्डहरू: युरोप | EN 61496-1 (Type 4), EN ISO 13849-1:2015 (Category 4, PLe), EN 61508-1 to 3 (SIL3), EN 55011, EN 50178, EN 61000-6-2(Note) Regarding EU Machinery Directive, a Notified Body, TÜV SÜD, has certified with the type examination certificate. |
| नियन्त्रण आउटपुटहरू (OSSD १, OSSD २) | PNP open-collector transistor / NPN open-collector transistor (switching method)• Maximum source current: 200 mA• Applied voltage: Same as supply voltage (between the control output and +V)• Residual voltage: 2.5 V or less (source current 200 mA, when using 20 m65.617 ftlength cable)• Leakage current: 0.1 mA or less (Including power supply OFF condition)• Maximum load capacity: 0.22 micro F (No load to maximum output current)• Load wiring resistance: 3 Ω or less• Maximum sink current: 200 mA• Applied voltage: Same as supply voltage (between the control output and 0 V)• Residual voltage: 2.5 V or less (sink current 200 mA, when using 20 m65.617 ftlength cable)• Leakage current: 0.1 mA or less (Including power supply OFF condition)• Maximum load capacity: : 0.22 micro F (No load to maximum output current)• Load wiring resistance: 3 Ω or less |
| लागू हुने मापदण्डहरू: उत्तर अमेरिका | ANSI / UL 61496-1 / 2 (Type 4), ANSI / UL 508, CAN / CSA 61496-1 / 2 (Type 4), CAN / CSA C22.2 No.14, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI / RIA 15.06(Note) With regards to the standards in the US/Canada, a Notified Body, TÜV SÜD, has certified the CTÜVUS mark. |
| बाह्य उपकरण अनुगमन प्रकार्य | Incorporated |
| सहायक आउटपुट (गैर-सुरक्षा आउटपुट) | PNP open-collector transistor / NPN open-collector transistor (switching method)• Maximum source current: 60 mA• Applied voltage: Same as supply voltage (between the auxiliary output and +V)• Residual voltage: 2.5 V or less (source current 60 mA, when using 20 m65.617 ftlength cable)• Maximum sink current: 60 mA• Applied voltage: Same as supply voltage (between the auxiliary output and 0 V)• Residual voltage: 2.5 V or less (sink current 60 mA, when using 20 m65.617 ftlength cable) |
| ठूलो बहुउद्देश्यीय सूचक प्रकार्य | Incorporated |
| सहायक आउटपुट म्युट गर्दै: सञ्चालन मोड | When muting auxiliary output: ON |
| लागू हुने नियमहरू र प्रमाणपत्रहरू | CE Marking (Machinery Directive, EMC Directive, RoHS Directive), UKCA Marking [Supply of Machinery (Safety) Regulations, EMC Regulations, RoHS Regulations], TÜV SÜD certification |
| वातावरणीय प्रतिरोध: परिवेशको आर्द्रता | 30 to 85 % RH, Storage: 30 to 85 % RH |
| वातावरणीय प्रतिरोध: झट्का प्रतिरोध | 300 m / s2acceleration (30 G approx.) in X, Y and Z directions for three times each |
| सहायक आउटपुट म्युट गर्दै: सुरक्षा सर्किट | Incorporated |
| खुद तौल (इमिटर र रिसीभरको कुल) | approx. 590 g |
| लागू हुने मापदण्डहरू: अन्तर्राष्ट्रिय मापदण्ड | IEC 61496-1 / 2 (Type 4), ISO 13849-1:2015 (Category 4, PLe), IEC 61508-1 to 3 (SIL3) |
| वातावरणीय प्रतिरोध: परिवेशको तापक्रम | -10 to +55℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: –25 to +60 ℃–3 to +140 ℉ |
| वातावरणीय प्रतिरोध: सुरक्षाको डिग्री | IP65 (IEC) |
| वातावरणीय प्रतिरोध: कम्पन प्रतिरोध | 10 to 55 Hz frequency, 0.75 mm0.030 inamplitude in X, Y and Z directions for two hours each |
| वातावरणीय प्रतिरोध: इन्सुलेशन प्रतिरोध | 20 MΩ or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| नियन्त्रण आउटपुटहरू (OSSD 1, OSSD 2): सञ्चालन मोड | ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the safety light curtain or the synchronization signal)(Note) During muting, control output will not turn off even if the beams are interrupted.(Note) When the blanking function is enabled, the operating mode will change. |
| नियन्त्रण आउटपुटहरू (OSSD1, OSSD2): सुरक्षा सर्किट | Incorporated |
| वातावरणीय प्रतिरोध: भोल्टेज सहनशीलता | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| सहायक आउटपुट (गैर-सुरक्षा आउटपुट): सञ्चालन मोड | OFF when control outputs are ON, ON when control outputs are OFF (Factory setting, operating mode can be changed using the SFB-HC handy-controller.) |
| सहायक आउटपुट (गैर-सुरक्षा आउटपुट): सुरक्षा सर्किट | Incorporated |
| हालको खपत: ठूलो बहुउद्देश्यीय सूचक बल्छ | Emitter: 70 mA or lessReceiver: 80 mA or less |
| हालको खपत: ठूला बहुउद्देश्यीय सूचक बत्तीहरू निभ्छन् | Emitter: 60 mA or lessReceiver: 70 mA or less |
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
स्थापना र सञ्चालन मार्गनिर्देश