

| प्यारामीटर | मूल्य |
|---|---|
| गहिराई | 146 mm |
| चौडाइ | 61 mm |
| उचाइ | ≤ 2000 m |
| इन्सुलेशन | Reinforced insulation |
| उत्पादनको प्रकार | Relay Module |
| माउन्टिङ प्रकार | DIN rail mounting |
| कम्पोनेन्टहरू सहित | yes |
| प्रदूषणको डिग्री | 2 |
| जडान विधि | IDC/FLK pin strip |
| माउन्ट गर्ने स्थिति | any |
| सञ्चालन सम्बन्धी नोटहरू | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
| पदहरूको संख्या | 14 |
| मूल्याङ्कन गरिएको वृद्धि भोल्टेज | 6 kV (1.2/50 μs) |
| सुरक्षाको डिग्री | IP00 |
| ओभरभोल्टेज श्रेणी | III |
| जडानहरूको संख्या | 1 |
| मापदण्ड/नियमहरू | DIN EN 50178: 1998-04 |
| सम्पर्क स्विचिङ प्रकार | Single contact, 1 changeover contact |
| नाममात्र इनपुट भोल्टेज संयुक्त राष्ट्र | 24 V DC (±10 %) |
| मूल्याङ्कन गरिएको इन्सुलेशन भोल्टेज | 260 V |
| अधिकतम स्विचिङ भोल्टेज | 150 V AC/DC (Maximum switching voltage of 230 V AC: the maximum switching voltage of 230 V is only permitted if the same fuse circuit is used. The outputs are not suitable for switching different outer conductors.) |
| कन्डक्टर क्रस सेक्सन AWG | 24 ... 12 |
| निरन्तर प्रवाह सीमित गर्दै | 4 A |
| संयुक्त राष्ट्र संघमा विशिष्ट इनपुट करेन्ट | 200 mA (200 mA supply / ≤ 20 mA input current per signal) |
| कन्डक्टर क्रस सेक्सन कडा | 0.2 mm² ... 2.5 mm² |
| परिवेशको तापक्रम (सञ्चालन) | -20 °C ... 50 °C |
| कन्डक्टर क्रस सेक्सन लचिलो | 0.2 mm² ... 2.5 mm² |
| मानक अनुसार जडान | IEC 60603-13 |
| सुरक्षाको डिग्री (स्थापना स्थान) | ≥ IP54 (Installation location) |
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
स्थापना र सञ्चालन मार्गनिर्देश