स्टकमा उपलब्ध लोकप्रिय उत्पादन
ULSH901
ULSH901 LS-H901 PANASONIC Sensor head, retro reflective, range 1m, cable 2m
$0.00USD
3159 स्टकमा
मुख्य विशिष्टताहरू
वस्तु:Specifications
केबल:0.09 mm22-core two parallel shielded cables, 2 m 6.562 ft long(Note：Cable cannot be extended.)
तौल:Net weight: 50 g approx.Gross weight: 85 g approx.
विवरणहरू:Sensor heads(Coaxial retroreflective type)
आपूर्तिकर्ता जानकारी
PANASONIC
उत्पादहरू: 4316
सामान्यतया २-३ कार्यदिवसभित्र पठाइन्छ
गुणस्तर ग्यारेन्टी
छिटो शिपिङ
प्राविधिक सहयोग
प्राविधिक विशिष्टताहरू
| प्यारामीटर | मूल्य |
|---|---|
| वस्तु | Specifications |
| केबल | 0.09 mm22-core two parallel shielded cables, 2 m 6.562 ft long(Note：Cable cannot be extended.) |
| तौल | Net weight: 50 g approx.Gross weight: 85 g approx. |
| विवरणहरू | Sensor heads(Coaxial retroreflective type) |
| उत्पादन | Amplifier-separated Type Digital Laser Sensor |
| सामाग्री | Enclosure: PBTIndicator cover: PolycarbonateBeam-emitting / receiving surfaces: Glass |
| सहायक उपकरण | MS-LS-1(Mounting bracket): 1pc.RF-330(Refrector): 1pc. |
| स्पट आकार | Approx. dia. 6 mm dia. 0.236 in or less (at a distance from the sensor head of 1 m 3.281 ft) |
| सुरक्षा | IP40 (IEC) |
| भाग नम्बर | LS-H901 |
| उत्पादनको नाम | Amplifier-separated Type Digital Laser Sensor LS-500 |
| उत्पादन नम्बर | LS-H901 |
| सेन्सिङ वस्तु | Opaque, translucent, or transparent object(Note：Make sure to confirm detection with an actual sensor before use.) |
| परिवेशको आर्द्रता | 35 to 85 % RH, Storage: 35 to 85 % RH |
| झट्का प्रतिरोध | 98 m / s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| सेन्सिङ दायरा: HYPR | 0.01 to 2.5m0.033 to 8.202 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| सेन्सिङ दायरा: U-LG | 0.01 to 2m0.033 to 6.562 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| परिवेश रोशनी | Incandescent light: 3,000 ℓx or less at the light-receiving face |
| परिवेशको तापक्रम | -10 to +55degrees + 14 to + 131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70degrees -4 to +158 degrees Fahrenheit |
| सञ्चालन सूचक | Orange LED (lights up when the amplifier output is ON) |
| कम्पन प्रतिरोध | 10 to 500 Hz frequency, 1.5 mm double amplitude or maximum acceleration 98 m/s2in X, Y, and Z direction for 2 hours each. |
| लागू हुने एम्पलीफायरहरू | LS-501(P), LS-501(P)-C2(Note：When using the thru-beam typeLS-H101□orLS-H102□, do not set the receiving light sensitivity (gctL) of the applicableLS-500series amplifier to level 2 or less. This is because there is a possibility of sensing becoming unstable.) |
| उत्सर्जन तत्व: प्रकार | Red semiconductor laser diode |
| इन्सुलेशन प्रतिरोध | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| नियामक अनुपालन | EMC Directive, RoHS Directive |
| सेन्सिङ दायरा: STD मोड | 0.01 to 1m0.033 to 3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| सेन्सिङ दायरा: द्रुत मोड | 0.01 to 1m0.033 to 3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| सेन्सिङ दायरा: H-SP मोड | 0.01 to 1m0.033 to 3.281 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| सेन्सिङ दायरा: U-LG मोड | 0.01 to 1.5m0.033 to 4.921 ft(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| भोल्टेज सहनशीलता | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| उत्सर्जन तत्व: लेजर वर्ग | Class 1 [IEC / EN / JIS / GB / KS / FDA](Note：This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3. |
| उत्सर्जन तत्व: अधिकतम आउटपुट | 1mW |
| उत्सर्जन तत्व: शिखर उत्सर्जन तरंगदैर्ध्य | 660 nm 0.026 mil |
उत्पादन विवरण
LS500. Sensor head, reflection on mirror, range 1m
मुख्य विशेषताहरू
- औद्योगिक स्तरको गुणस्तर
- RoHS अनुरूप
- सीई प्रमाणित
- १-वर्षीय वारंटी
उत्पादन कागजातहरू
डेटासिट
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
प्रयोगकर्ता म्यानुअल
स्थापना र सञ्चालन मार्गनिर्देश
