


| प्यारामीटर | मूल्य |
|---|---|
| वस्तु | Specifications |
| आउटपुट | PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1.5 V or less (at 100 mA source current) |
| तौल | Net weight: 15 g approx.Gross weight: 75 g approx. |
| विवरणहरू | Standard type [Cable set] |
| उत्पादन | Digital Fiber Sensor |
| सामाग्री | Enclosure: PolycarbonateKey switch: PolycarbonateFiber lock lever: PBT |
| सहायक उपकरण | FC-FX-1(Protection cover): 1 pc. (Note)CN-14A-C2 (Connector attached cable, 2 m6.562 ftlong): 1 pc.(Note) Protection cover FC-FX-1 has been attached from the production at July, 2011. |
| भाग नम्बर | FX-101P-CC2 |
| केबल लम्बाइ | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cable. |
| उत्पादनको नाम | Digital Fiber Sensor FX-100 |
| प्रतिक्रिया समय | Emission frequency 0: 250 micro s or less (factory default setting)Emission frequency 1: 450 micro s or lessEmission frequency 2: 500 micro s or lessEmission frequency 3: 600 micro s or less |
| बाह्य इनपुट | PNP non-contact input- Signal conditionHigh: +4 V to +V DC (Sink current 0.5 to 3 mA)Low: 0 to +0.6 V DC or Open- Input impedance: 10 kOhm approx. |
| उत्पादन नम्बर | FX-101P-CC2 |
| आपूर्ति भोल्टेज | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| टाइमर प्रकार्य | ON-delay / OFF-delay timer, switchable either effective or ineffective[Timer period: 1 ms, 5 ms, 10 ms, 20 ms, 40 ms, 50 ms, 100 ms, 500 ms, 1,000 ms] |
| डिजिटल डिस्प्ले | 4 digits (green) + 4 digits (red) LCD display |
| परिवेशको आर्द्रता | 35 to 85 % RH, Storage: 35 to 85 % RH |
| झट्का प्रतिरोध | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
| जडान विधि | Connector(Note) Connector attached cable CN-14A-C2 is not attached to the models that have no ''-CC2'' at the end of the model Nos.Make sure to use the optional connector attached cable CN-14A(-R)-Cx or the connector CN-14A, or a connector manufactured by J.S.T. Mfg., Ltd.(contact: SPHD-001T-P0.5, housing: PAP-04V-S). |
| बिजुली खपत | Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage) |
| परिवेश रोशनी | Incandescent light: 3,000 lx or less at the light-receiving face |
| परिवेशको तापक्रम | –10 to +55 ℃+14 to +131℉(If 4 to 7 units are mounted close together: –10 to +50 ℃+14 to +122℉, if 8 to 16 units are mounted close together: –10 to +45 ℃+14 to +113℉) (No dew condensation or icing allowed),Storage: –20 to +70 ℃–4 to +158℉ |
| सञ्चालन सूचक | Orange LED (lights up when the output is ON) |
| संवेदनशीलता सेटिङ | 2-point teaching / Limit teaching / Full-auto teaching |
| कम्पन प्रतिरोध | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| इन्सुलेशन प्रतिरोध | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| आउटपुट: आउटपुट सञ्चालन | Selectable either Light-ON or Dark-ON, at SET mode |
| भोल्टेज सहनशीलता | 1,000 V AC for one min. between all supply terminals connected together and enclosure(Note) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
| उत्सर्जन तत्व (मड्युलेटेड) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| सीई मार्किंग निर्देशन अनुपालन | EMC Directive, RoHS Directive |
| आउटपुट: सर्ट-सर्किट सुरक्षा | Incorporated |
| उत्सर्जन रकम सेटिङ प्रकार्य | 3-level + Auto setting (from production in December 2007) |
| हस्तक्षेप रोकथाम कार्य | Incorporated Emission frequency selection method (Functions at emission frequency 1, 2 or 3)(Note) When using the interference prevention function, set the emission frequencies for the amplifiers to be covered by the interference prevention function to different frequency values.However, the interference prevention function does not operate at emission frequency 0 (factory default setting). |
| राम्रो संवेदनशीलता समायोजन प्रकार्य | Incorporated |
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
स्थापना र सञ्चालन मार्गनिर्देश