


| प्यारामीटर | मूल्य |
|---|---|
| वस्तु | Specifications |
| आउटपुट | PNP open-collector transistor- Maximum source current: 50 mA- Applied voltage: 26.4 V DC or less (between output and +V)- Residual voltage: 2 V or less (at 50 mA source current), 1 V or less (at 16 mA source current) |
| विवरणहरू | Thru-beam type |
| उत्पादन | Amplifier Built-in Ultra-compact Laser Sensor |
| सामाग्री | Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate |
| सहायक उपकरण | MS-EXL2-2 (Mounting plate): 2 pcs. |
| सुरक्षा | IP67 (IEC) |
| भाग नम्बर | EX-L211-P-J |
| उत्पादनको नाम | Amplifier Built-in Ultra-compact Laser Sensor EX-L200 |
| दोहोरिने क्षमता | Perpendicular to sensing axis: 0.05 mm0.0020 inor less |
| प्रतिक्रिया समय | 0.5 ms or less |
| सेन्सिङ दायरा | 1 m3.281 ft |
| उत्पादन नम्बर | EX-L211-P-J |
| सेन्सिङ वस्तु | Opaque object of ø2 mmø0.079 inor more |
| आपूर्ति भोल्टेज | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| पावर सूचक | Green LED (lights up when the power is ON) (incorporated on the emitter) |
| परिवेशको आर्द्रता | 35 to 85 % RH, Storage: 35 to 85 % RH |
| उत्सर्जन तत्व | Red semiconductor laser Class 1 (IEC / JIS/ FDA/ GB/ EN/ KS) (Note:This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH(Center for Devices and Radiological Health) under the FDA (Food and Drug Administration)(Maximum output: 1 mW, Peak emission wavelength: 655 nm0.026 mil) |
| झट्का प्रतिरोध | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| परिवेश रोशनी | Incandescent light: 3,000 lx or less at the light-receiving face |
| परिवेशको तापक्रम | -10 to +55 ℃+14 to +131 ℉(No dew condensation or no icing condition),Storage: -30 to +70 ℃-22 to +158 ℉ |
| हालको खपत | Emitter: 10 mA or lessReceiver: 10 mA or less |
| सञ्चालन सूचक | Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type) |
| स्थिरता सूचक | Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type) |
| संवेदनशीलता समायोजक | Continuously variable adjuster (incorporated on the receiver) |
| कम्पन प्रतिरोध | 10 to 500 Hz frequency, 1.5 mm0.059 indouble amplitude (10 G max.) in X, Y and Z directions for two hours each |
| इन्सुलेशन प्रतिरोध | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| नियामक अनुपालन | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| आउटपुट: आउटपुट सञ्चालन | Light-ON / Dark-ON selectable by the output operation switching input |
| भोल्टेज सहनशीलता | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| उत्सर्जन स्थान आकार (सामान्य) | Approx. 6 × 4 mm0.236 × 0.157 in(vertical × horizontal)(at a sensing distance of 1 m) |
| आउटपुट: सर्ट-सर्किट सुरक्षा | Incorporated (short-circuit protection / inverse polarity protection) |
| न्यूनतम संवेदन वस्तु (विशिष्ट) | Opaque object of ø0.3 mmø0.012 in(Note)Typical values when the sensitivity adjuster is optimally adjusted. |
| दोहोरिने क्षमता (विशिष्ट) (सेन्सिङ अक्षको लम्ब) | 0.01 mm0.0004 inor less(all area)(Note)Typical values when the sensitivity adjuster is optimally adjusted. |
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
स्थापना र सञ्चालन मार्गनिर्देश