स्टकमा उपलब्ध लोकप्रिय उत्पादन
UDPHL113
UDPHL113 DPH-L113 PANASONIC Sensor head DPH-L113 for positive pressure, 0 to 1.0MPa, R1/4 male thread, cable..
$0.00USD
3290 स्टकमा
मुख्य विशिष्टताहरू
वस्तु:Specifications
केबल:0.2 mm23-core heat resistant cabtyre cable 2 m3.562 ftlong
टिप्पणी:Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃+73.4 ℉.The sensor head can be used independently.
तौल:Net weight : 100 g approx., Gross weight : 150 g approx.
आपूर्तिकर्ता जानकारी
PANASONIC
उत्पादहरू: 4316
सामान्यतया २-३ कार्यदिवसभित्र पठाइन्छ
गुणस्तर ग्यारेन्टी
छिटो शिपिङ
प्राविधिक सहयोग
प्राविधिक विशिष्टताहरू
| प्यारामीटर | मूल्य |
|---|---|
| वस्तु | Specifications |
| केबल | 0.2 mm23-core heat resistant cabtyre cable 2 m3.562 ftlong |
| टिप्पणी | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃+73.4 ℉.The sensor head can be used independently. |
| तौल | Net weight : 100 g approx., Gross weight : 150 g approx. |
| विवरणहरू | Sensor head |
| उत्पादन | Head-separated Dual display Digital Pressure Sensor [For gas & liquid] |
| सामाग्री | Diaphragm : Stainless steel (SUS603), Pressure port : Stainless steel (SUS304), Throttle : Stainless steel (SUSXM7) |
| सुरक्षा | IP67 (IEC) |
| सामानहरू | Connector (e-CON) : 1 pc. |
| भाग नम्बर | DPH-L113 |
| उत्पादनको नाम | Head-separated Dual display Digital Pressure Sensor [For gas & liquid] DPC-L100 / DPH-L100 |
| प्रेसर पोर्ट | R1/4 male thread (throttle embeded) |
| प्रतिक्रिया समय | 1 ms or less |
| उत्पादन नम्बर | DPH-L113 |
| आपूर्ति भोल्टेज | 9 to 36 V DC[9 to 32 V DC when using the attached connector (e-CON)] |
| केबल एक्सटेन्सन | Extension up to total 10 m32.808 ftis possible with 0.2 mm2, or more, cable. |
| परिवेशको आर्द्रता | 35 to 85 % RH, Storage : 35 to 85 % RH |
| लागू हुने तरल पदार्थ | Gases and fluids that do not corrode stainless steel SUS630, SUS304, or SUSXM7 |
| ग्राउन्डिङ विधि | Capacitor earth (Enclosure-supply terminal) |
| झट्का प्रतिरोध | 1,000 m/s2acceleration in X, Y and Z directions three times each |
| दबाबको प्रकार | Sealed gauge pressure(Note): The sensor's internal mechanism is sealed based on an air pressure of 1,013 hPa. |
| जडान विधि | Connector |
| परिवेशको तापक्रम | -20 to +70 ℃-4 to +158 ℉(No dew condensation or icing allowed),\n Storage: -30 to +70℃-22 to +158 ℉ |
| हालको खपत | 20 mA or less |
| मूल्याङ्कन गरिएको दबाव दायरा | 0 to +1 MPa |
| कम्पन प्रतिरोध | 10 to 2,000 Hz frequency, acceleration 200 m/s2, in X direction for four hours, in Y and Z directions for two hours each(Note): The X, Y, and Z directions are defined as follows : |
| एनालग भोल्टेज आउटपुट | Output voltage: 1 to 5 V DC (over rated pressure range)\n Accuracy: ±1.0 % F.S. (at 23 ±2 ℃+73.4 ±35 ℉)\n ±2.0 % F.S. (at -20 to 70 ℃-4 to +158 ℉)\n (including linearity, hysteresis and repeatability) |
| इन्सुलेशन प्रतिरोध | 100 MΩ, or more, with 50 V DC megger between all supply terminals connected together and enclosure |
| लागू हुने नियमहरू | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| मध्यम तापक्रम दायरा | -20 to +70 ℃-4 to +158 ℉ |
| भोल्टेज सहनशीलता | 150 V AC for one min. between all supply terminals connected together and enclosure |
| दबाब सहनशीलता | 2 MPa |
उत्पादन विवरण
Sensor head, positive pressure. 0 to 1MPa. R1/4 male pressure port.
मुख्य विशेषताहरू
- औद्योगिक स्तरको गुणस्तर
- RoHS अनुरूप
- सीई प्रमाणित
- १-वर्षीय वारंटी
उत्पादन कागजातहरू
डेटासिट
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
प्रयोगकर्ता म्यानुअल
स्थापना र सञ्चालन मार्गनिर्देश
