


| प्यारामीटर | मूल्य |
|---|---|
| वस्तु | Specifications |
| केबल | 0.09 mm24-core cabtyre cable 1 m3.280 ft |
| तौल | Net weight: 15 g approx., Gross weight: 25 g approx. |
| विवरणहरू | for ø4 mmø0.156 intube |
| उत्पादन | For small diameter tubes Optical Bubble Sensor |
| सामाग्री | Enclosure: PBT, Tube holder: Polyamide, Indicator: Polycarbonate |
| भाग नम्बर | BE-A401 |
| उत्पादनको नाम | For small diameter tubes Optical Bubble Sensor BE-A |
| उत्पादन नम्बर | BE-A401 |
| सेन्सिङ वस्तु | Liquid(Note) Sensing is affected by dirt or residues adhered to the inner wall of the tube. Please maintain the tube regularly. |
| आपूर्ति भोल्टेज | 5 to 24 V DC ±10 % Ripple P-P 10 % or less |
| केबल एक्सटेन्सन | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable.(Note)Confirm that the power supply voltage at the end of cable is more than 4.5 V when using an extension of over 20 m65.167 ft. |
| क्ल्याम्पिङ टर्क | 0.5N•m or less |
| उत्सर्जक तत्व | Infrared LED(Peak emission wavelength: 855 nm0.034 mil, non-modulated) |
| पत्ता लगाउन सकिने हावाको खाडल | 0.8 mm0.032 inor more(Note) Sensing air gap refers to the width of an air bubble formed in the entire area of the inner diameter of the tube. Please note that this product cannot sense very small air bubbles or water drops. |
| हालको खपत | 15 mA or less |
| सञ्चालन सूचक | Orange LED (lights up with absent liquid) |
| सुरक्षा सर्किटहरू | Power supply reverse polarity protection , Output reverse polarity protection |
| लागू हुने ट्यूब प्रकार | Transparent resin tube (equivalent to flexible PVC)(Note) When using a tube out of specifications or it doesn't have a smooth surface, please test sensing on the actual machine before use. |
| अनुरूप नियमन | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| लागू हुने ट्यूब व्यास (OD×ID) | ø4 mm × ø2.4 mmø5/32 in × ø3/32 in(Note) When using a tube out of specifications or it doesn't have a smooth surface, please test sensing on the actual machine before use. |
| प्रतिक्रिया समय: बबल पत्ता लगाउँदा | 20 μs or less(Note) Actual response time may differ from specification (typical example using applicable tube) due to dimension, light transmission or surface state of test tube in use. |
| प्रतिक्रिया समय: तरल पदार्थ पत्ता लगाउँदा | 80 μs or less(Note) Actual response time may differ from specification (typical example using applicable tube) due to dimension, light transmission or surface state of test tube in use. |
| आउटपुट (२ आउटपुटहरू सहित समावेश गरिएको) | NPN open-collector transistor•Maximum sink current: 50 mA•Applied voltage: 30 V DC or less (between output and 0 V)•Residual voltage: 2 V or less (sink current at 50 mA) 1 V or less (sink current at 16 mA) |
| वातावरणीय प्रतिरोध: संरक्षण | IP40 (IEC) |
| वातावरणीय प्रतिरोध: परिवेशको आर्द्रता | 35 to 85 % RH, Storage: 35 to 85 % RH |
| वातावरणीय प्रतिरोध: झट्का प्रतिरोध | 100 m/s2acceleration in X, Y, and Z directions three times each |
| वातावरणीय प्रतिरोध: परिवेश रोशनी | Fluorescent light: 1,000 ℓx at the light-receiving face |
| वातावरणीय प्रतिरोध: परिवेशको तापक्रम | -25 to +55 ℃-13 to +131 ℉(No dew condensation or icing allowed), Storage: -30 to +80 ℃-22 to +176 ℉(Note) Liquid being detected should also be kept within the rated ambient temperature range. |
| वातावरणीय प्रतिरोध: कम्पन प्रतिरोध | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each |
| वातावरणीय प्रतिरोध: इन्सुलेशन प्रतिरोध | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| वातावरणीय प्रतिरोध: भोल्टेज सहनशीलता | 1,000 V AC for between one min. between all supply terminals connected together and enclosure |
| आउटपुट (२ आउटपुटहरू सहित समावेश गरिएको): आउटपुट सञ्चालन | Switchable either Liquid-absent-ON or Liquid-present-ON |
| आउटपुट (२ आउटपुटहरू सहित समावेश गरिएको): सर्ट-सर्किट सुरक्षा | Incorporated |
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
स्थापना र सञ्चालन मार्गनिर्देश