![SF4D-H24-01 - SF4D-H24-01 PANASONIC Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D](http://www.baigongbaohao.com/pic/684/797/sf4d-h24-01.jpg)
स्टकमा उपलब्ध लोकप्रिय उत्पादन
SF4D-H24-01
SF4D-H24-01 PANASONIC Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D
$0.00USD
4771 स्टकमा
मुख्य विशिष्टताहरू
वस्तु:Specifications
पीएफएचडी:1.56×10-9
MTTFDLanguage:782 years or more
टिप्पणी:Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃+68 ℉.PFHD: Probability of Dangerous Failure per Hour, MTTFD: Mean Time to Dangerous Failure (in years).
आपूर्तिकर्ता जानकारी
PANASONIC
उत्पादहरू: 4316
सामान्यतया २-३ कार्यदिवसभित्र पठाइन्छ
गुणस्तर ग्यारेन्टी
छिटो शिपिङ
प्राविधिक सहयोग
प्राविधिक विशिष्टताहरू
| प्यारामीटर | मूल्य |
|---|---|
| वस्तु | Specifications |
| पीएफएचडी | 1.56×10-9 |
| MTTFDLanguage | 782 years or more |
| टिप्पणी | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 ℃+68 ℉.PFHD: Probability of Dangerous Failure per Hour, MTTFD: Mean Time to Dangerous Failure (in years). |
| विवरणहरू | Min. sensing object ø25 mmø0.984 in(20 mm0.787 inbeam pitch) |
| उत्पादन | Safety Light Curtain [Type 4 PLe SIL3] |
| सामाग्री | Enclosure : Aluminum, Detection surface : Polycarbonate resin and stainless steel (SUS304), Upper cap / lower cap : Nylon |
| सामानहरू | SF4B-TR25 (test rod) : 1 pc. |
| भाग नम्बर | SF4D-H24-01 |
| उत्पादनको नाम | Compact & Robust Safety Light Curtain [Type 4 PLe SIL3] SF4D |
| सुरक्षा अवस्था | Control output (OSSD 1 / 2) OFF state |
| पावर भोल्टेज | 24 V DC+20-30 %Ripple P-P 10 % or less (excluding voltage drop due to cable)(Note): In consideration of the voltage drop caused by the cable, use Control output (OSSD 1, OSSD 2) source / sink current and cable length as a guideline. |
| उत्पादन नम्बर | SF4D-H24-01 |
| उपप्रणाली प्रकार | Type B (IEC 61508-2) |
| केबल एक्सटेन्सन | Total length of emitter / receiver can be extended up to 70 m229.659 fteach using optional mating cable (including the lengthof series mating cables)(Note): In consideration of the voltage drop caused by the cable, use Control output (OSSD 1, OSSD 2) source / sink current and cable length as a guideline. |
| म्युट गर्ने प्रकार्य | Incorporated (12-core cable) |
| सञ्चालन दायरा | Short mode : 0.2 to 9 m0.656 to 29.528 ftLong mode : 0.8 to 15 m2.625 to 49.213 ft(selectable by DIP switch)(Note): The operating range is the possible setting distance between the emitter and the receiver. |
| परिवेशको आर्द्रता | 30 to 85 % RH, Storage : 30 to 95 % RH |
| उत्सर्जन तत्व | Infrared LED (peak emission wavelength : 850 nm0.0335 mil) |
| प्रदूषणको डिग्री | 3 |
| झट्का प्रतिरोध | 300 m/s2acceleration (30 G approx.) in X, Y, and Z directions three times eachMalfunction resistance 100 m/s2acceleration (10 G approx.) in X, Y, and Z directions 1,000 times each |
| जडान विधि | By connector |
| प्रकार्य ओभरराइड गर्नुहोस् | Incorporated (12-core cable) |
| सुरक्षात्मक उचाइ | 470 mm18.504 in(Note): When using as a safety device for a press machine in China or when using SF4D-□-01 as a safety device for a press machine or paper shearing machine in Japan, the length from the center of the first beam channel to the center of the last beam channel become to be protective height. |
| इन्टरलक प्रकार्य | Incorporated [Manual reset / auto reset (selectable by wiring)] (8-core cable or 12-core cable) |
| सञ्चालन उचाइ | 2,000 m6,561.68 ftor less(Note): Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m. |
| वैकल्पिक कार्यहरू | Optional functions cannot be used when SF4D-□-01 is used. |
| परिवेश रोशनी | Incandescent light : 5,000 ℓx or less at the light-receiving surface |
| परिवेशको तापक्रम | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage : -25 to +60 ℃-13 to +140 ℉ |
| हालको खपत | Emitter : 100 mA or lessReceiver : 130 mA or less |
| न्यूनतम सेन्सिङ वस्तु | ø25 mmø0.984 inopaque object(Note): When the floating blanking function is used, the size of the minimum sensing object varies. For the detail, refer to the section on Safety distance. |
| पावर बचत प्रकार्य | Incorporated |
| परीक्षण इनपुट प्रकार्य | Incorporated |
| बीम च्यानलहरूको संख्या | 24 |
| कम्पन प्रतिरोध | 10 to 55 Hz, 0.75 mm0.030 indouble amplitude in X, Y, and Z directions for two hours eachMalfunction resistance 10 to 55 Hz, 0.75 mm0.030 indouble amplitude in X, Y, and Z directions twenty times each |
| असफल प्रतिक्रिया समय | Within response time (OFF response) |
| इन्सुलेशन प्रतिरोध | 20 MΩ, or more, with 500 V DC megger, between all supply terminals connected together and enclosure |
| सिङ्क्रोनाइजेसन विधि | Line synchronization / optical synchronization (selectable by DIP switch) |
| प्रभावकारी एपर्चर कोण | ±2.5° or less at a sensing range of 3 m9.843 ftor longer (based on IEC 61496-2) |
| लकआउट रिलीज प्रकार्य | Incorporated |
| T1 (प्रमाण परीक्षण अन्तराल) | 20 years |
| लागू हुने मापदण्डहरू: जापान | JIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 7 (SIL3) |
| SFF (सुरक्षित विफलता अंश) | 99% |
| अनुप्रयोग सूचक प्रकार्य | Incorporated (only the receiver lights up when optical synchronization is used) |
| HFT (हार्डवेयर त्रुटि सहनशीलता) | 1 |
| लागू हुने मापदण्डहरू: चीन (GB) | GB/T 4584 |
| सीई मार्किंग निर्देशन अनुपालन | Machinery Directive, EMC Directive, RoHS Directive |
| लागू हुने मापदण्डहरू: युरोप (EU) | EN 61496-1/2 (Type 4), EN ISO 13849-1 (Category 4, PLe), EN 55011, EN 61000-6-2, EN 50178 |
| नियन्त्रण आउटपुटहरू (OSSD १, OSSD २) | PNP open-collector transistor / NPN open collector transistor (selectable)<PNP output selected>・Maximum source current : 350 mA・Applied voltage : Same as supply voltage(between control output and +V)・Residual voltage : 2 V or less (source current 350 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state)・Maximum load capacity : 2.2 μF・Load wiring resistance : 3 Ω or less<NPN output selected>・Maximum sink current : 350 mA・Applied voltage : Same as supply voltage(between control output and 0 V)・Residual voltage : 2 V or less (sink current 350 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state)・Maximum load capacity : 2.2 μF・Load wiring resistance : 3 Ω or less |
| हस्तक्षेप रोकथाम कार्य | <Not connected in series/parallel>・Line synchronization : 2 units or less (auto)・Optical synchronization : 2 units or less (selectable by DIP switch)<Connected in series/parallel>・Series connection : 5 units or less (total number of beam channels 256 or less)・Parallel connection : 3 units or less (total number of beam channels 192 or less)(Note)・Series / parallel connection mixed : 5 units or less (total number of beam channels 144 or less)(Note)(Note): Note that the setting cannot be changed when SF4D-□-01 is used. |
| लागू हुने मापदण्डहरू: उत्तर अमेरिका | ANSI/UL 61496-1/2 (Type 4),CAN/CSA C22.2 No.14, CAN/CSA E61496-1/2 |
| बाह्य उपकरण अनुगमन प्रकार्य | Incorporated (8-core cable or 12-core cable) |
| तौल (इमिटर र रिसीभरको कुल) | 1,100g approx. |
| सहायक आउटपुट (AUX)(गैर-सुरक्षा आउटपुट) | PNP open-collector transistor / NPN open collector transistor (selectable)<PNP output selected>・Maximum source current : 60 mA・Applied voltage : Same as supply voltage(between auxiliary output and +V)・Residual voltage : 2 V or less (source current 60 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state)<NPN output selected>・Maximum sink current : 60 mA・Applied voltage : Same as supply voltage(between auxiliary output and 0 V)・Residual voltage : 2 V or less (sink current 60 mA)(excluding voltage drop due to cable)・Leakage current : 0.2 mA or less (including power OFF state) |
| लागू हुने मापदण्डहरू: अन्तर्राष्ट्रिय मापदण्ड | IEC 61496-1/2 (Type 4), ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL3) |
| नियन्त्रण आउटपुट (OSSD १, OSSD २): प्रतिक्रिया समय | OFF response : 10 ms or less (Not connected in series / parallel), 18 ms or less (Connected in series / parallel)(Note 1)ON response : 50 ms or less (Note 2)(Note 3)(Note 1): For response times by number of beams, refer to the Control output (OSSD 1, OSSD 2) OFF response times.(Note 2): Because the control output (OSSD 1, OSSD 2) must be OFF for at least 80 ms, the ON response will be delayed more than 50 ms when the light blocked time is less than 30 ms.(Note 3): When optical synchronization is selected, if the beam axes of both the top end and bottom end are blocked, the ON response speed decreases by as much as 1 sec. |
| वातावरणीय प्रतिरोध: सुरक्षाको डिग्री | IP67, IP65 (IEC), NEMA Type 13 (NEMA 250) |
| नियन्त्रण आउटपुटहरू (OSSD 1, OSSD 2): सञ्चालन मोड | ON when all beams are received, OFF when one or more beams are blocked(Also OFF when internal sensor error or synchronization signal error occurs)(Note): Note that the setting cannot be changed when SF4D-□-01 is used. |
| नियन्त्रण आउटपुटहरू (OSSD1, OSSD2): सुरक्षा सर्किट | Incorporated |
| वातावरणीय प्रतिरोध: डाइलेक्ट्रिक शक्ति भोल्टेज | 1,000 V AC for one minute, between all supply terminals connected together and enclosure |
| सहायक आउटपुट (AUX) (गैर-सुरक्षा आउटपुट): प्रतिक्रिया समय | OFF response : 60 ms or less, ON response : 60 ms or less |
| सहायक आउटपुट (AUX) (गैर-सुरक्षा आउटपुट): सञ्चालन मोड | Control output ON : OFF, Control output OFF : ON(Note): Note that the setting cannot be changed when SF4D-□-01 is used. |
| सहायक आउटपुट (AUX) (गैर-सुरक्षा आउटपुट): सुरक्षा सर्किट | Incorporated |
| सुरक्षात्मक उचाइ: चिनियाँ प्रेस मेसिनको लागि सुरक्षा उपकरणको रूपमा प्रयोग गर्दा वा जापानी प्रेस मेसिन वा कागज काट्ने मेसिनको लागि प्रयोग गर्दा | 460 mm18.110 in(Note): When using as a safety device for a press machine in China or when using SF4D-□-01 as a safety device for a press machine or paper shearing machine in Japan, the length from the center of the first beam channel to the center of the last beam channel become to be protective height. |
उत्पादन विवरण
More details
मुख्य विशेषताहरू
- औद्योगिक स्तरको गुणस्तर
- RoHS अनुरूप
- सीई प्रमाणित
- १-वर्षीय वारंटी
उत्पादन कागजातहरू
डेटासिट
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
प्रयोगकर्ता म्यानुअल
स्थापना र सञ्चालन मार्गनिर्देश
