


| प्यारामीटर | मूल्य |
|---|---|
| वस्तु | Specifications |
| पीएफएचडी | 7.23 × 10-9 |
| MTTFDLanguage | 100 years or more |
| विवरणहरू | Min. sensing object ø27 mm ø1.063 in type (20 mm0.787 inbeam pitch) |
| उत्पादन | Safety Light Curtain Type 2 |
| सामाग्री | Enclosure: AluminiumUpper and lower edges : Die-cast zine alloyInner case: Polycarbonate / Polyester resinCap: PBT |
| बिम पिच | 20 mm0.787 in |
| सामानहरू | SF2B-TR27 (Test rod): 1 No. |
| भाग नम्बर | SF2B-H36-P |
| उत्पादनको नाम | Safety Light Curtain Type 2 SF2B Ver.2 |
| पावर भोल्टेज | 24 V DC plus or minus 15 % Ripple P-P 10 % or less |
| प्रतिक्रिया समय | OFF response: 15 ms or lessON response: 40 to 60 ms |
| उत्पादन नम्बर | SF2B-H36-P |
| केबल एक्सटेन्सन | Extension up to total 30.5 m100.066 ftis possible for both emitter and receiver, with optional mating cables. |
| सञ्चालन दायरा | 0.2 to 13 m0.656 to 42.651 ft(0.2 to 5 m0.656 to 16.404 ftwhen using the SF2B-CB05-B adapter cable) |
| परिवेशको आर्द्रता | 30 to 85 % RH, Storage: 30 to 95 % RH |
| उत्सर्जन तत्व | Infrared LED (Peak emission wavelength: 870 nm0.034 mil) |
| झट्का प्रतिरोध | 300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| जडान विधि | Connector |
| सुरक्षात्मक उचाइ | 712 mm28.031 in |
| परिवेश रोशनी | Incandescent light: 3,500 lx or less at the light-receiving face |
| परिवेशको तापक्रम | -10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 ℃-13 to +158 ℉ |
| हालको खपत | Emitter: 50 mA or lessReceiver: 80 mA or less |
| न्यूनतम सेन्सिङ वस्तु | ø27 mm ø1.063 in opaque object |
| बीम च्यानलहरूको संख्या | 36 |
| कम्पन प्रतिरोध | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| इन्सुलेशन प्रतिरोध | 20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| सहायक आउटपुट (Aux) | PNP open-collector transistor- Max. source current: 60 mA- Applied voltage: same as supply voltage [between the auxiliary output and +V]- Residual voltage: 2.5 V or less (sink current 60 mA)(when using 30.5 m100.066 ftlength cable)(Note) When using auxiliary output (AUX), the SF2B-CB05-B adapter cable (optional) cannot be used. |
| उत्सर्जन रोक्ने कार्य | Incorporated |
| सिङ्क्रोनाइजेसन विधि | Cable synchronization (optical synchronization when using SF2B-CB05-B) |
| प्रभावकारी एपर्चर कोण | plus or minus 5℃ or less [for an operating range exceeding 3 m9.843 ft(conforming to IEC 61496-2 / UL 61496-2)] |
| लागू हुने मापदण्डहरू: जापान | JIS B 9704-1/2 (Type 2), JIS B 9705-1 (Category 2), JIS C 0508 (SIL1) |
| सीई मार्किंग निर्देशन अनुपालन | Machinery Directive, EMC Directive, RoHS Directive |
| लागू हुने मापदण्डहरू: युरोप (EU) | EN 61496-1 (Type 2), EN 55011 |
| नियन्त्रण आउटपुटहरू (OSSD १, OSSD २) | PNP open-collector transistor- Max. source current: 200 mA- Applied voltage: same as supply voltage [between the control output (OSSD 1, OSSD 2) and +V]- Residual voltage: 2.5 V or less (sink current 200 mA) (when using 30.5 m100.066 ftlength cable) |
| हस्तक्षेप रोकथाम कार्य | Incorporated- Series connection: 3 sets max. (Total 128 beam channels). (However, SF2B-Ax allows up to a total of 96 beam channels when two sets are connected, and up to 64 beam channels when three sets are connected). (Note 1)SF2B-Hx and SF2B-Ax can be used together. (Note 2)[When using SF2B-CB05-B (optical synchronization):- Series connection: 3 sets max. (Total 128 beam channels). (However, SF2B-Ax allows up to a total of 96 beam channels when two sets are connected, and up to 64 beam channels when three sets are connected). (Note 1)- Parallel connection: 2 sets max.- Series and parallel mixed connection: Series connection of 3 sets max. and parallel connection of 2 sets max. are simultaneously possible.SF2B-Hx and SF2B-Ax can be used together. (Note 2)](Note 1) The SF2B-H8-x and SF2B-A4-x cannot be connected in series.(Note 2) When making series connection mixing SF2B-Hx and SF2B-Ax, calculate by doubling the number of optical axes only for SF2B-Ax, and make the total number of optical axes fall below 128 axes.(e.g.) When making series connection with SF2B-H36 and SF2B-A44, the total number of optical axes will be 124 axes. The number of optical axes for SF2B-H36 + (number of optical axes for SF2B-A44 × 2) = total number of optical axes. 36 optical axes + (44 optical axes × 2) = 124 optical axes. |
| लागू हुने मापदण्डहरू: उत्तर अमेरिका | UL 61496-1/2 (Type 2), UL 508, UL 1998 (Class 1), CSA C22.2 No.14, CSA C22.2 No.0.8, OSHA 1910.212 (Note), OSHA 1910.217 (C) (Note), ANSI B11.1 to B11.19, ANSI/RIA 15.06(Note) Not compatible when using the bottom cap cable SF2B-CB05-A. |
| बाह्य उपकरण अनुगमन प्रकार्य | Incorporated |
| सहायक आउटपुट (Aux): सञ्चालन मोड | When using SF2B-CCBx or SF2B-CBx: OFF when OSSD ON, ON when OSSD OFFWhen using SF2B-CB05-A: ON during normal operation, OFF when there is a problem with emitter operation or emission is halted |
| तौल (इमिटर र रिसीभरको कुल) | 930 g approx. |
| सहायक आउटपुट (Aux): सुरक्षा सर्किट | Incorporated |
| लागू हुने मापदण्डहरू: अन्तर्राष्ट्रिय मापदण्ड | IEC 61496-1/2 (Type 2), ISO 13849-1 (Category 2, PLc), IEC 61508-1 to 7 (SIL1) |
| वातावरणीय प्रतिरोध: सुरक्षाको डिग्री | IP65 (IEC) (*IP67 is later than Ver.2) |
| नियन्त्रण आउटपुटहरू (OSSD 1, OSSD 2): सञ्चालन मोड | ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the Safety Light Curtain or the synchronization signal) |
| नियन्त्रण आउटपुटहरू (OSSD1, OSSD2): सुरक्षा सर्किट | Incorporated |
| वातावरणीय प्रतिरोध: डाइलेक्ट्रिक शक्ति भोल्टेज | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
स्थापना र सञ्चालन मार्गनिर्देश