

| प्यारामीटर | मूल्य |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| कोडिङ | B |
| ढालिएको | yes |
| केबलको प्रकार | PROFIBUS [910] |
| टाउकोको डिजाइन | Socket |
| सुरक्षा नोट | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| सेन्सरको प्रकार | PROFIBUS |
| थ्रेडको प्रकार | M12 |
| केबल लम्बाइ | 0.5 m |
| केबलको तौल | 90 kg/km |
| हलोजन-रहित | in accordance with DIN VDE 0472 part 815 |
| उत्पादनको प्रकार | Circular connectors (device side) |
| UL AWM शैली | 21198 (80°C/300 V) |
| माउन्टिङ प्रकार | Rear mounting |
| समग्र मोड | 2 cores with 2 fillers to the core |
| सिल सामग्री | FKM |
| केबल क्षमता | nom. 30 pF/m |
| तरंग प्रतिबाधा | 150 Ω ±10 % (3 MHz ... 20 MHz) |
| AWG सिग्नल लाइन | 24 |
| लेख संशोधन | 12 |
| सम्पर्क सामग्री | CuZn |
| ज्वाला प्रतिरोध | UL 1581, Section 1060 and UL 2556, Section 9.3 (FT1) |
| हेड थ्रेडको प्रकार | M12 |
| सामग्री, फिलर | PP |
| अन्य प्रतिरोध | Low adhesion |
| जडान विधि | Cable connection |
| हेड केबल आउटलेट | straight |
| हेड लकिङ प्रकार | SPEEDCON |
| टर्क कस्दै | 2 Nm ... 3 Nm |
| कन्डक्टर सामग्री | Tin-plated Cu litz wires |
| सम्पर्क प्रतिरोध | ≤ 3 mΩ |
| नाममात्र वर्तमान IN | 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed) |
| नाममात्र भोल्टेज संयुक्त राष्ट्र | 48 V AC |
| सञ्चालन सम्बन्धी नोटहरू | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| अर्डर जानकारी: | Lock nut is included in the scope of delivery |
| शिल्ड एटेन्युएसन | ≤ 0.049 dB/m (at 16 MHz) |
| एकल तार, रङ | red, green |
| कन्डक्टर संरचना | 1x2xAWG24/19 |
| प्रदूषणको डिग्री | 3 |
| आयामी रेखाचित्र | |
| पदहरूको संख्या | 2 |
| मूल्याङ्कन गरिएको वृद्धि भोल्टेज | 1.5 kV |
| प्रसारण माध्यम | Copper |
| सुरक्षाको डिग्री | IP67 (When plugged in) |
| केबल आउटलेटहरूको संख्या | 1 |
| ओभरभोल्टेज श्रेणी | II |
| मानक पदनाम | M12 connector |
| इन्सुलेशन प्रतिरोध | ≥ 100 MΩ |
| बाहिरी आवरण, रंग | red lilac RAL 4001 |
| नाममात्र भोल्टेज, केबल | 300 V |
| बाहिरी आवरण, सामग्री | PUR |
| परीक्षण भोल्टेज कोर/कोर | 1500 V (50 Hz, 1 min.) |
| कन्डक्टर क्रस सेक्सन | 2x 0.25 mm² (Signal line) |
| सम्पर्क जडान प्रकार | Socket |
| बाह्य केबल व्यास | 7.80 mm ±0.2 mm |
| अप्टिकल शिल्ड कभरिङ | 85 % |
| सम्पर्क वाहक सामग्री | PA 6.6 |
| सम्पर्क सतह सामग्री | Ni/Au |
| सामग्री तार इन्सुलेशन | Foam-Skin PP |
| मापदण्ड/विशिष्टताहरू | IEC 61076-2-101 |
| परीक्षण भोल्टेज कोर/शिल्ड | 1500.00 V (50 Hz, 1 min.) |
| अधिकतम कन्डक्टर प्रतिरोध | ≤ 78.6 Ω/km |
| सम्मिलन/निकासी चक्रहरू | > 100 |
| स्क्रू जडानको लागि सामग्री | Zinc die-cast, nickel-plated |
| तार व्यास सहित इन्सुलेशन | 2.55 mm ±0.07 mm |
| परिवेशको तापक्रम (सञ्चालन) | -40 °C ... 80 °C (cable, fixed installation) |
| कन्डक्टर संरचना सिग्नल लाइन | 19x 0.13 mm |
| गतिशील भार क्षमता (झुकाव) | Max. bending cycles: 4000000, Bending radius: 65 mm, Traversing path: 4.5 m, Traversing rate: 3 m/s, Acceleration: 3 m/s², Ambient temperature: -20 °C ... 60 °C |
| UL ९४ अनुसार ज्वलनशीलता मूल्याङ्कन | V0 |
| सबैभन्दा सानो झुकाउने त्रिज्या, निश्चित स्थापना | 40 mm |
| सबैभन्दा सानो झुकाउने त्रिज्या, चल स्थापना | 65 mm |
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
स्थापना र सञ्चालन मार्गनिर्देश