

| प्यारामीटर | मूल्य |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| कोडिङ | D |
| सामान्य जानकारी | Contact connection method: Crimp connection |
| ढालिएको | no |
| केबलको प्रकार | TPE litz wire |
| आवेदन | Data |
| टाउकोको डिजाइन | Pin |
| सुरक्षा नोट | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| सेन्सरको प्रकार | PROFINET |
| थ्रेडको प्रकार | M12 |
| केबल लम्बाइ | 0.5 m |
| उत्पादनको प्रकार | Circular connectors (device side) |
| माउन्टिङ प्रकार | Front mounting Square flange |
| सिल सामग्री | FKM |
| AWG सिग्नल लाइन | 22 |
| लेख संशोधन | 09 |
| केबल प्रतिरोध | ≤ 57.6 mΩ/m |
| सम्पर्क सामग्री | CuZn |
| हेड थ्रेडको प्रकार | M12 |
| जडान विधि | Individual wires |
| हेड केबल आउटलेट | straight |
| टर्क कस्दै | 3 Nm ... 4 Nm (Installation-side) |
| कन्डक्टर सामग्री | Tin-plated Cu litz wires |
| सम्पर्क प्रतिरोध | ≤ 3 mΩ |
| नाममात्र वर्तमान IN | 4 A |
| नाममात्र भोल्टेज संयुक्त राष्ट्र | 250 V (AC) |
| सञ्चालन सम्बन्धी नोटहरू | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| एकल तार, रङ | yellow, orange, white, blue |
| केबल क्रस सेक्सन | 0.34 mm² |
| प्रदूषणको डिग्री | 3 |
| पदहरूको संख्या | 4 |
| मूल्याङ्कन गरिएको वृद्धि भोल्टेज | 2.5 kV |
| परीक्षण भोल्टेज, केबल | 2000 V AC |
| प्रसारण माध्यम | Copper |
| सुरक्षाको डिग्री | IP67 |
| केबल आउटलेटहरूको संख्या | 1 |
| ओभरभोल्टेज श्रेणी | II |
| सिग्नलको प्रकार/श्रेणी | PROFINET CAT5 (IEC 11801:2002) |
| मानक पदनाम | M12 connector |
| इन्सुलेशन प्रतिरोध | ≥ 100 MΩ |
| ग्रिप बडीको सामग्री | Zinc die-cast, nickel-plated |
| मोटाई, इन्सुलेशन | 0.21 mm (Core insulation) |
| नाममात्र भोल्टेज, केबल | 300 V |
| कन्डक्टर क्रस सेक्सन | 0.34 mm² |
| सम्पर्क जडान प्रकार | Pin |
| सम्पर्क वाहक सामग्री | PA 6.6 |
| सम्पर्क सतह सामग्री | Ni/Au |
| सामग्री तार इन्सुलेशन | TPE |
| मापदण्ड/विशिष्टताहरू | according to IEC 61076-2-101 |
| अधिकतम कन्डक्टर प्रतिरोध | 57.6 mΩ/m |
| केबल इन्सुलेशन प्रतिरोध | ≥ 20 MΩ*km |
| सम्मिलन/निकासी चक्रहरू | > 100 |
| स्क्रू जडानको लागि सामग्री | Zinc die-cast, nickel-plated |
| तार व्यास सहित इन्सुलेशन | 1.2 mm ±0.07 mm |
| परिवेशको तापक्रम (सञ्चालन) | -40 °C ... 85 °C (cable, fixed installation) |
| कन्डक्टर संरचना सिग्नल लाइन | 7x 0.25 mm |
| UL ९४ अनुसार ज्वलनशीलता मूल्याङ्कन | V0 |
| प्रसारण विशेषताहरू (श्रेणी) | CAT5 (IEC 11801:2002) |
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
स्थापना र सञ्चालन मार्गनिर्देश