

| प्यारामीटर | मूल्य |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| कोडिङ | B |
| ढालिएको | no |
| टाउकोको डिजाइन | Pin |
| सुरक्षा नोट | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| थ्रेडको प्रकार | M12 |
| विधानसभा नोट | 25 mm side length |
| माउन्टिङ प्रकार | Front mounting Square flange 25 mm side length |
| स्थिति प्रदर्शन | no |
| लेख संशोधन | 02 |
| हेड थ्रेडको प्रकार | M12 |
| जडान विधि | Crimp connection |
| हेड केबल आउटलेट | straight |
| सम्पर्क प्रतिरोध | ≤ 3 mΩ |
| नाममात्र वर्तमान IN | 4 A |
| नाममात्र भोल्टेज संयुक्त राष्ट्र | 60 V |
| सञ्चालन सम्बन्धी नोटहरू | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| केबल क्रस सेक्सन | 0.34 mm² |
| प्रदूषणको डिग्री | 3 |
| पदहरूको संख्या | 5 |
| मूल्याङ्कन गरिएको वृद्धि भोल्टेज | 1.5 kV |
| सुरक्षाको डिग्री | IP67 |
| केबल आउटलेटहरूको संख्या | 1 |
| ओभरभोल्टेज श्रेणी | II |
| मानक पदनाम | M12 connector |
| इन्सुलेशन प्रतिरोध | ≥ 100 MΩ |
| स्थिति प्रदर्शन उपस्थित छ | No |
| सम्पर्क वाहक सामग्री | PA 6.6 |
| मापदण्ड/विशिष्टताहरू | IEC 61076-2-101 |
| परिवेशको तापक्रम (सञ्चालन) | -25 °C ... 85 °C (Plug / socket) |
| UL ९४ अनुसार ज्वलनशीलता मूल्याङ्कन | V0 |
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
स्थापना र सञ्चालन मार्गनिर्देश