PSP-600-13.5

600W with PFC and Parallel Function 600W with PFC and Parallel Function600W with PFC and Parallel Function PSP-600series PSP-600seriesPSP-600series Features : Features :Features : Universal AC input / Full range Universal AC input / Full rangeUniversal AC input / Full range Built-in active PFC function Built-in active PFC functionBuilt-in active PFC function Protections: short circuit/ Overload / Over voltage/ Over temperature Protections: short circuit/ Overload / Over voltage/ Over temperatureProtections: short circuit/ Overload / Over voltage/ Over temperature The forced air cooling built-in DC fan The forced air cooling built-in DC fanThe forced air cooling built-in DC fan With DC OK Signal output With DC OK Signal outputWith DC OK Signal output Current sharingup to 2400W(3+1) Current sharingup to 2400W(3+1)Current sharingup to 2400W(3+1) Built-in remote ON-OFF control Built-in remote ON-OFF controlBuilt-in remote ON-OFF control Built-in remote sense function Built-in remote sense functionBuilt-in remote sense function Fixed switchingfrequencyat PFC:88KHz PWM:100KHz Fixed switchingfrequencyat PFC:88KHz PWM:100KHzFixed switchingfrequencyat PFC:88KHz PWM:100KHz 3 years warranty 3 years warranty3 years warrantySPECIFICATION SPECIFICATIONSPECIFICATION MODEL MODELMODEL PSP-600-5 PSP-600-5PSP-600-5 PSP-600-12 PSP-600-12PSP-600-12 ( except for 5V,12V ) ( except for 5V,12V )( except for 5V,12V )PSP-600-13.5 PSP-600-15PSP-600-24 PSP-600-27 PSP-600-48 PSP-600-13.5 PSP-600-15PSP-600-24 PSP-600-27 PSP-600-48PSP-600-13.5 PSP-600-15PSP-600-24 PSP-600-27 PSP-600-48 THE DC VOLTAGE THE DC VOLTAGETHE DC VOLTAGE 5V 12V 5V 12V5V 12V 13.5 V 15V24V27V 13.5 V 15V24V27V13.5 V 15V24V27V 48V 48V48V RATED CURRENT CURRENT RANGE RATED POWER RATED CURRENT CURRENT RANGE RATED POWERRATED CURRENT CURRENT RANGE RATED POWER 80A 80A80A 0 ~ 80A 0 ~ 80A0 ~ 80A 400W 400W400W 50A 50A50A 0 ~ 50A 0 ~ 50A0 ~ 50A 600W 600W600W 44.5 A 40A25A22.2A 12.5 a 44.5 A 40A25A22.2A 12.5 a44.5 A 40A25A22.2A 12.5 a 0 ~ 44.5 0 ~ 40A0 ~ 25A0 ~ 22.2 A 0 ~ 12.5 A 0 ~ 44.5 0 ~ 40A0 ~ 25A0 ~ 22.2 A 0 ~ 12.5 A0 ~ 44.5 0 ~ 40A0 ~ 25A0 ~ 22.2 A 0 ~ 12.5 A 600.75W600W 600W 599.4W600W 600.75W600W 600W 599.4W600W600.75W600W 600W 599.4W600W RIPPLE & NOISE (max.) Note.2180mVp-p RIPPLE & NOISE (max.) Note.2180mVp-pRIPPLE & NOISE (max.) Note.2180mVp-p 240mVp-p 240mVp-p240mVp-p 240mVp-p240mVp-p240mVp-p240mVp-p300mVp-p 240mVp-p240mVp-p240mVp-p240mVp-p300mVp-p240mVp-p240mVp-p240mVp-p240mVp-p300mVp-p OUTPUT VOLTAGE ADJ. RANGE of OUTPUT VOLTAGE ADJ. RANGE ofOUTPUT VOLTAGE ADJ. RANGE of 4.75 ~ 5.5 V 4.75 ~ 5.5 V4.75 ~ 5.5 V 10 ~ 13.2 V 10 ~ 13.2 V10 ~ 13.2 V 12 ~ 15V13.5 ~ 18V 20 ~ 26.4 V 24 ~ 30V41 ~ 56V 12 ~ 15V13.5 ~ 18V 20 ~ 26.4 V 24 ~ 30V41 ~ 56V12 ~ 15V13.5 ~ 18V 20 ~ 26.4 V 24 ~ 30V41 ~ 56V VOLTAGE TOLERANCE Note.32.0% VOLTAGE TOLERANCE Note.32.0%VOLTAGE TOLERANCE Note.32.0% 1.0% 1.0%1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0%1.0% 1.0% 1.0% 1.0% 1.0% LINE REGULATION LOAD REGULATION LINE REGULATION LOAD REGULATIONLINE REGULATION LOAD REGULATION 0.5% 0.5%0.5% 1.0% 1.0%1.0% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% 0.5% 0.5%0.5% SETUP, RISE TIME HOLD TIME (Typ.) SETUP, RISE TIME HOLD TIME (Typ.)SETUP, RISE TIME HOLD TIME (Typ.) 1500ms, 50ms at full load 1500ms, 50ms at full load1500ms, 50ms at full load 20ms at full load 20ms at full load20ms at full load VOLTAGE RANGE Note.5 88 ~ 264VAC124 ~ 370VDC VOLTAGE RANGE Note.5 88 ~ 264VAC124 ~ 370VDCVOLTAGE RANGE Note.5 88 ~ 264VAC124 ~ 370VDC FREQUENCY RANGE POWER FACTOR (Typ.) FREQUENCY RANGE POWER FACTOR (Typ.)FREQUENCY RANGE POWER FACTOR (Typ.) 47 ~ 63Hz 47 ~ 63Hz47 ~ 63Hz 0.95/230VAC0.99/115VAC at full load 0.95/230VAC0.99/115VAC at full load0.95/230VAC0.99/115VAC at full load INPUT INPUTINPUT EFFICIENCY(Typ.) EFFICIENCY(Typ.)EFFICIENCY(Typ.) 79% 79%79% 84% 84%84% 85%85%86%86% 85%85%86%86%85%85%86%86% 87% 87%87% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENT AC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE CURRENTAC CURRENT (Typ.) INRUSH CURRENT (Typ.) THE LEAKAGE OF CURRENTOVERLOAD The OVERHEAD ofThe OVERHEAD of 6.8 A/115VAC 3.4 A/230VAC 6.8 A/115VAC 3.4 A/230VAC6.8 A/115VAC 3.4 A/230VAC 20A/115VAC40A/230VAC 20A/115VAC40A/230VAC20A/115VAC40A/230VAC <1.3 mA/240VAC <1.3 mA/240VAC<1.3 mA/240VAC 105 ~ 135% rated output power 105 ~ 135% rated output power105 ~ 135% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Constant current limiting, recovers automatically after fault condition is removedProtection type : Constant current limiting, recovers automatically after fault condition is removed PROTECTION PROTECTIONPROTECTION 5.75 ~ 6.75 V 5.75 ~ 6.75 V5.75 ~ 6.75 V 13.8 ~ 16.2 V 13.8 ~ 16.2 V13.8 ~ 16.2 V 15.5 ~ 18.2V18 ~ 21V27.6 ~ 32.4V31 ~ 36.5 57.6 V ~ 67.2 V 15.5 ~ 18.2V18 ~ 21V27.6 ~ 32.4V31 ~ 36.5 57.6 V ~ 67.2 V15.5 ~ 18.2V18 ~ 21V27.6 ~ 32.4V31 ~ 36.5 57.6 V ~ 67.2 V OVER VOLTAGE OVER VOLTAGEOVER VOLTAGE Protection type : Shut down o/p voltage, re-power on to recover Protection type : Shut down o/p voltage, re-power on to recoverProtection type : Shut down o/p voltage, re-power on to recover Over TEMPERATURE shut down o/p voltage, re-power on to recover Over TEMPERATURE shut down o/p voltage, re-power on to recoverOver TEMPERATURE shut down o/p voltage, re-power on to recoverFUNCTION The FUNCTIONFUNCTIONENVIRONMENT ENVIRONMENTENVIRONMENT SAFETY AND EMC SAFETY AND EMCSAFETY AND EMC (Note 4) (Note 4)(Note 4)OTHER OTHEROTHER REMOTE CONTROL POK SIGNAL WORKING TEMP. WORKING HUMIDITY REMOTE CONTROL POK SIGNAL WORKING TEMP. WORKING HUMIDITYREMOTE CONTROL POK SIGNAL WORKING TEMP. WORKING HUMIDITY STORAGE TEMP., The MOISTURE STORAGE TEMP., The MOISTURESTORAGE TEMP., The MOISTURE TEMP. COEFFICIENT VIBRATION TEMP. COEFFICIENT VIBRATIONTEMP. COEFFICIENT VIBRATION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSIONSAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY MTBF DIMENSION EMC IMMUNITY MTBF DIMENSIONEMC IMMUNITY MTBF DIMENSION PACKAGING PACKAGINGPACKAGING RC+/RC-: Short = power on ; Open = power off RC+/RC-: Short = power on ; Open = power offRC+/RC-: Short = power on ; Open = power off The psu turns on: 3.3 V ~ 5.6 V psu turn off: 0V ~ 1V The psu turns on: 3.3 V ~ 5.6 V psu turn off: 0V ~ 1VThe psu turns on: 3.3 V ~ 5.6 V psu turn off: 0V ~ 1V -20 ~ +60 ° c (Refer to "Reduction Curve") -20 ~ +60 ° c (Refer to "Reduction Curve")-20 ~ +60 ° c (Refer to "Reduction Curve") 20 ~ 90% RH non-condensing 20 ~ 90% RH non-condensing20 ~ 90% RH non-condensing -40 ~ +85℃, 10 ~ 95% RH -40 ~ +85℃, 10 ~ 95% RH-40 ~ +85℃, 10 ~ 95% RH 0.03%/c (0 ~ 50 ° c) 0.03%/c (0 ~ 50 ° c)0.03%/c (0 ~ 50 ° c) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes UL60950-1, TUV EN60950-1, CCC GB4943.1 approved UL60950-1, TUV EN60950-1, CCC GB4943.1 approvedUL60950-1, TUV EN60950-1, CCC GB4943.1 approved I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVACI/P-O/P:3KVAC I/P-FG:2KVACO/P-FG:0.5 KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RHI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25c/ 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3, GB9245, GB17625.1 Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3, GB9245, GB17625.1Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3, GB9245, GB17625.1 Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level,criteria A Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level,criteria ACompliance to EN61000-4-2,3,4,5,6,8,11, light industry level,criteria A 116.4 K hrs min.MIL-HDBK-217F (25c) 116.4 K hrs min.MIL-HDBK-217F (25c)116.4 K hrs min.MIL-HDBK-217F (25c) 170*120*93mm (L*W*H) 170*120*93mm (L*W*H)170*120*93mm (L*W*H) 1.9 Kg; 8pcs/15.5 Kg/1.06 CUFT 1.9 Kg; 8pcs/15.5 Kg/1.06 CUFT1.9 Kg; 8pcs/15.5 Kg/1.06 CUFTNOTE NOTENOTE 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature.1. All parameters NOT specially mentioned are measured at 230vac input, ratedload and 25 ° c ambient temperature. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.2. Curly and noiseare measured at 20 mhz of bandwidth by usinga 12" twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Tolerance : includes set up tolerance, line regulation and load regulation.3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. All EMC testing has been executed by the mounting of the unit in 4. The power supply is considered a component which will be installed into a final equipment. All EMC testing has been executed by the mounting of the unit in4. The power supply is considered a component which will be installed into a final equipment. All EMC testing has been executed by the mounting of the unit in a 360 mm*360 mm metal plate with 1 mm thickness. The final equipment must be re-confirmed that still meets EMC directives. For guidance on how to a 360 mm*360 mm metal plate with 1 mm thickness. The final equipment must be re-confirmed that still meets EMC directives. For guidance on how toa 360 mm*360 mm metal plate with 1 mm thickness. The final equipment must be re-confirmed that still meets EMC directives. For guidance on how to to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com) to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com)to perform these EMC tests, please refer to "EMI testingof component powersupplies." (available in http://www.meanwell.com) 5. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details. 5. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.5. Deratingmay be necessary underlow input voltages. Please checkthe of the curve of reduction of power for more details.File name:PSP-600-SPEC2015-10-12 File name:PSP-600-SPEC2015-10-12File name:PSP-600-SPEC2015-10-12