


| प्यारामीटर | मूल्य |
|---|---|
| नाम | NPF-90D-36BE |
| राज्य | New |
| ढाँचा | Box |
| शृङ्खला | NPF-90D-BE |
| मधुरो पार्दै | 0-10V, 1-10V, Resistance 0-100K, PWM Signal 10V |
| अनुमोदनहरू | CCC, CE, EAC, ENEC, UL |
| पावर (W) | 90,00 |
| उपढाँचा | IP67 |
| चौडाइ (मिमी) | 63.00 |
| उचाइ (मिमी) | 37.50 |
| एसी इनपुट अधिकतम | 305,00 |
| न्यूनतम एसी इनपुट | 90,00 |
| अनुप्रयोगहरू | Lighting |
| निर्माता | MEAN WELL |
| उत्पादनको प्रकार | LED Driver |
| आइसोलेसन (V) | 3.750,00 |
| अधिकतम शक्ति (W) | Ninety |
| इनपुट कनेक्टर | Cable |
| इनपुट फ्रिक्वेन्सी | 50 Hz, 60 Hz |
| लामो/पृष्ठभूमि | 171.00 |
| लामो विवरण | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in box waterproof plasticIP67.Input range90-305Vca47-63Hz.Output in constant current2,5 A.Range of output voltage21.6 to 36Vccaccording to demade the load.Power:90W.Efficiency typical:90%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10V,a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class II without grounding.Factor corrector, power>0,96to 230vac at full load.Auxiliary output 12V/200mA(it is not regulated, it can vary between 11.4 and is 12.6).Consumption without load <0,50 W.Operating temperature range of caseTcfrom-40ºCup+85ºC.Dimensions (Length x Width x Height):171 x 63 x 37.5 mm5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream. This version has an outputauxiliaryof12V/200mA(it is not regulated, it can vary between 11.4 and is 12.6).This source can operate in either Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.You can also work in voltage mode constant giving a fixed voltage of 36V if the load is powered at constant voltage and does not overcome the maximum output power.With plastic housing, watertight, designed for lighting applications in indoor, decorative, architectural, signage, mobile (roads, screens...) or tunnel lighting. Suitable for damp and wet conditions. Approved HL Class I Division 2 for ex-zones in the US.Can be adjusted by regulatory assets or liabilities0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| आउटपुट कनेक्टर | Cable |
| प्रविष्टि CA को प्रकार | Single-phase |
| वारेन्टी (वर्ष) | 5,00 |
| उत्पत्तिको देश | China |
| आउटपुट वर्तमान mA | Two thousand five hundred |
| न्यूनतम आउटपुटको तीव्रता (mA) | 2.500,00 |
| आउटपुट अधिकतमको तीव्रता (mA) | 2.500,00 |
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
स्थापना र सञ्चालन मार्गनिर्देश