स्टकमा उपलब्ध लोकप्रिय उत्पादन
HVG-240-24D2
HVG-240-24D2 MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 12-24VDC 240W / 10A. Smart Dim..
$0.00USD
4040 स्टकमा
मुख्य विशिष्टताहरू
नाम (विवरण):HVG-240-24D2
राज्य (विवरण):Requires Minimum Quantities
ढाँचा (विवरणहरू):Box
स्वीकृतिहरू (विवरणहरू):UL
आपूर्तिकर्ता जानकारी
MEANWELL
उत्पादहरू: 6448
सामान्यतया २-३ कार्यदिवसभित्र पठाइन्छ
गुणस्तर ग्यारेन्टी
छिटो शिपिङ
प्राविधिक सहयोग
प्राविधिक विशिष्टताहरू
| प्यारामीटर | मूल्य |
|---|---|
| नाम (विवरण) | HVG-240-24D2 |
| राज्य (विवरण) | Requires Minimum Quantities |
| ढाँचा (विवरणहरू) | Box |
| स्वीकृतिहरू (विवरणहरू) | UL |
| पावर (W) (विवरण) | 240,00 |
| नियमन (विवरण) | Smart |
| उपढाँचा (विवरणहरू) | IP67 |
| चौडाइ (मिमी) (विवरण) | 68.00 |
| उचाइ (मिमी) (विवरण) | 38.80 |
| एसी इनपुट अधिकतम (विवरण) | 528,00 |
| एसी इनपुट न्यूनतम (विवरण) | 180,00 |
| आवेदनहरू (विवरणहरू) | Lighting |
| निर्माता (विवरण) | MEAN WELL |
| उत्पादनको प्रकार (विवरण) | LED Driver |
| आइसोलेसन (V) (विवरणहरू) | 3.750,00 |
| अधिकतम शक्ति (W) (विवरण) | Two hundred forty |
| इनपुट कनेक्टर (विवरणहरू) | Cable |
| इनपुट फ्रिक्वेन्सी (विवरणहरू) | 50 Hz, 60 Hz |
| लामो/पृष्ठभूमि (विवरण) | 254.20 |
| लामो विवरण (विवरण) | LED driver dimmable with phase input.Specially designed for powering LEDs directly in a steady stream.Format in metal box sealedIP67.Input rangeEighteen0-528Vca47-63Hz.Output in constant current10A.Range of output voltage with current mode constant12 to24vdcaccording to demand load.Power:240W.Efficiency typical:To 92.5%.Regulation Smart Dimmingwith programmable functions.Input class I with grounding.Factor corrector, power>0,98to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+90ºC.Dimensions (Length x Width x Height):254,2 x 68 x 38,8 mm5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current.The series HVG are LED drivers, class I grounded.You can also work in voltage mode constant giving a fixed voltage of 24V if the load is powered at constant voltage and does not overcome the maximum output power.With metal housing IP67. The series HVG has a high efficiency designed for applications of public lighting, exterior, interior, or any application of LED lighting. Approved HL Class I Division 2 for ex-zones in the US. Complies with the requirements of security at the global level for lighting.The version of D2 with Smart Timer Dimming allows you to program through a PC, the curves of regulation of the driver. We can set up between 2 and 5 different levels for the night. You can make bends fixed on the basis of a few hours of operation, a proportional adjustment which can adjust the intervals according to the power-on hours, or an adjustment with the point of midnight, which maintains the central level fixed, and adjusts the times of the curves of the ends. In this way we can achieve greater energy savings and adjust the brightness levels according to the level of occupation.In addition to these adjustments in the versions of D2 you can limit the maximum output current, for example if we use a driver 1050mA and you only need to 900mA can be adjusted to the maximum value of the output current. We can also go to offsetting the loss of brightness of the LEDs with the hours of operation to always maintain a level of constant brightness.The adjustment of the transitions between different levels of regulation can be set up, so we can get a flowing transition between levels, for example the 100% and 50%. Each level you can set your own transition.This driver also saved the hours of operation of the driver and the LED module, and allows a function to Override, which allows us to easily disable from the box on the programming in for example the case of an accident or a party we would want to have the maximum light level for a night.The driver does not have a clock physical that is always working, if not that you have a timer that counts the operating hours of the past 7 days and based on those hours applied to the appropriate settings. Can be set up so that no account is taken of readings below a certain number of hours for which no account is taken of possible outages or problems with the programming of on and off of the box.With version Smart Timer dimming can achieve energy savings most important, always maintaining a level of brightness appropriate and with a stand-alone system that enables us to avoid any maintenance cost.To be able to program the computer we need the programming interface SDP-001 that allows you to connect the drivers ELG to a PC through the USB port. To be able to program the computer we need to connect it to the LED modules and the power grid. |
| आउटपुट कनेक्टर (विवरणहरू) | Cable |
| प्रविष्टि CA को प्रकार (विवरणहरू) | Three-phase |
| वारेन्टी (वर्ष) (विवरण) | 5,00 |
| उत्पत्तिको देश (विवरण) | China |
| आउटपुट वर्तमान mA (विवरण) | Ten thousand |
| न्यूनतम आउटपुटको तीव्रता (mA) (विवरण) | 10.000,00 |
| आउटपुट अधिकतम (mA) को तीव्रता (विवरण) | 10.000,00 |
उत्पादन विवरण
More details
मुख्य विशेषताहरू
- औद्योगिक स्तरको गुणस्तर
- RoHS अनुरूप
- सीई प्रमाणित
- १-वर्षीय वारंटी
प्राविधिक विवरणहरू
LED driver dimmable with phase input.
उत्पादन कागजातहरू
डेटासिट
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
प्रयोगकर्ता म्यानुअल
स्थापना र सञ्चालन मार्गनिर्देश
