


| प्यारामीटर | मूल्य |
|---|---|
| नाम | HLP-40H-20 |
| राज्य | Recommended Model |
| ढाँचा | Open Format |
| शृङ्खला | HLP-40H |
| मधुरो पार्दै | 1-10V, Resistance 0-100K, PWM Signal 10V |
| अनुमोदनहरू | CCC, CE, UL |
| पावर (W) | 40,00 |
| चौडाइ (मिमी) | 53.00 |
| उचाइ (मिमी) | 27.00 |
| एसी इनपुट अधिकतम | 305,00 |
| न्यूनतम एसी इनपुट | 90,00 |
| अनुप्रयोगहरू | Lighting |
| निर्माता | MEAN WELL |
| उत्पादनको प्रकार | LED Driver |
| आइसोलेसन (V) | 3.750,00 |
| अधिकतम शक्ति (W) | Forty |
| इनपुट कनेक्टर | Plug-in |
| इनपुट फ्रिक्वेन्सी | 50 Hz, 60 Hz |
| लामो/पृष्ठभूमि | 147.00 |
| लामो विवरण | LED driver.Specially designed for powering LEDs directly in a steady stream.Open format typePCBS.Input range90-305Vca47-63Hz.Output in constant current2A.Adjustable by external potentiometer (1,2-2A).Range of output voltage with current mode constant12 to 20vdcaccording to demand load.The output voltage in voltage mode constant20vdc. Adjustable by external potentiometer (17-22Vcc).Power:40W.Efficiency typical:88%.Potentiometers:This model incorporates 2 external potentiometers that allows us to regulate the output voltage and the maximum output current.Regulationfrom 10% to 100% of the output intensity with a slider1-10V, a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can not turn off the output, we can only go down to 10%.Input class I with grounding.Factor corrector, power>0,95to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+70ºC.Dimensions (Length x Width x Height):147 x 53 x 27mm.3 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current. The output voltage and the output current can be adjusted byexternal potentiometerslocated in the plate of the source, in addition to having regulation 0-10V/1-10V, 10V PWM, or resistance.With format, open PCB type. The series HLP is intended for applications of LED lighting. Suitable for dry environments and interior. Burn test at 100% load.Can be adjusted by regulatory assets or liabilities1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any dimmer 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| आउटपुट कनेक्टर | Plug-in |
| प्रविष्टि CA को प्रकार | Single-phase |
| वारेन्टी (वर्ष) | 3,00 |
| उत्पत्तिको देश | China |
| आउटपुट वर्तमान mA | 1200, 1250, 1300, 1350, 1400, 1450, 1500, 1550, 1600, 1650, 1700, 1750, 1800, 1850, 1900, 1950, 2000 |
| न्यूनतम आउटपुटको तीव्रता (mA) | 1.200,00 |
| आउटपुट अधिकतमको तीव्रता (mA) | 2.000,00 |
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
स्थापना र सञ्चालन मार्गनिर्देश