

| प्यारामीटर | मूल्य |
|---|---|
| GTIN सम्बन्धी जानकारी | 4046356095266 |
| नोट | Made to Order (non-returnable) |
| अर्डरकी | 1636897 |
| क्याटलग पृष्ठ | Page 551 (C-4-2015) |
| प्याकिङ युनिट | 1 pc |
| उत्पत्तिको देश | DE (Germany) |
| कस्टम ट्यारिफ नम्बर | 85366990 |
| (परिवेशको अवस्था) | 16 mm (70 mm²) |
| सम्पर्क सामग्री (सामान्य) | Copper alloy |
| मूल्याङ्कन गरिएको वर्तमान (आयामहरू) | 200 A |
| चौडाइ (मुख्य व्यावसायिक डेटा) | 34.2 mm |
| (मापदण्ड र नियमहरू) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| उचाइ (मुख्य व्यावसायिक डेटा) | 60 mm |
| लम्बाइ (मुख्य व्यावसायिक डेटा) | 29.4 mm |
| जडान प्रोफाइल (आयामहरू) | 1 |
| मूल्याङ्कन गरिएको वृद्धि भोल्टेज (आयामहरू) | 8 kV |
| सम्पर्क वाहक सामग्री (सामान्य) | PC |
| सम्पर्क सतह सामग्री (सामान्य) | Ag |
| मूल्याङ्कन गरिएको भोल्टेज (III/3) (आयामहरू) | 1000 V |
| शृङ्खला (यान्त्रिक विशेषताहरू) | HC-M-HS |
| प्रति टुक्रा तौल (प्याकिङ बाहेक) | 68.400 g |
| षट्कोणीय सकेट (परिवेश अवस्था) | WAF 5 |
| चीन RoHS (मानक र नियमहरू) | Environmentally Friendly Use Period = 50 |
| कडा टर्क (परिवेशको अवस्था) | 9 Nm (40 - 50 mm²) |
| जडान (यान्त्रिक विशेषताहरू) | Note regarding axial connection technology:Only for stranded wires. The specified conductor cross sections refer to the geometric cross section of the cable used.Use of cables with a geometric cross section very different from the cable's nominal cross section should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 Class 5. Deviating cable structures (e.g., Class 6 cables) should be checked before use.ConnectionBefore starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The wires should be inserted as far as they will go in the contact chamber (until the insulation touches the contact). Hold wires in position and use socket wrench to tighten. The used wire end should be cut off before connecting again. The connection screw may only be retightened once to prevent the litz wires from breaking. To prevent damage to the contact, the wire/cable should be mechanically intercepted at an appropriate distance from the connection point (e.g., by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly. The module cannot be used simultaneously with the HC-B..-TMB-SD-IP65 and HC-B..-TMS-SD-IP65 protective covers. |
| न्यूनतम आवास उचाइ (परिवेशको अवस्था) | 72 mm |
| कन्डक्टर क्रस सेक्सन (परिवेशको अवस्था) | 40 mm² ... 70 mm² (The cross section specification refers to the geometric cross section of the cable used) |
| जडान विधि (यान्त्रिक विशेषताहरू) | Axial screw connection |
| मानक (सामग्री डेटा) सँगको सम्बन्धमा जडान | UL |
| प्रदूषणको डिग्री (यान्त्रिक विशेषताहरू) | 3 |
| सम्मिलन/निकासी चक्र (परिवेश अवस्था) | ≥ 500 |
| जडान क्रस सेक्सन AWG (परिवेश अवस्था) | 1 ... 00 |
| ओभरभोल्टेज श्रेणी (यान्त्रिक विशेषताहरू) | III |
| विधानसभा निर्देशनहरू (यान्त्रिक विशेषताहरू) | - Use only flexible conductors,- Connection of wires with 5 mm an Allen wrench,- Housing height h ≥ 72 mm,- Connectors may only be operated without load/voltage. |
| मोड्युल स्लटहरूको संख्या (यान्त्रिक विशेषताहरू) | 2 |
| UL ९४ (सामग्री डेटा) अनुसार ज्वलनशीलता मूल्याङ्कन | V0 |
| इन्सुलेशन सहित तार व्यास (परिवेश अवस्था) | 12 mm (40 mm²) |
| परिवेशको तापक्रम (सञ्चालन) (विद्युत विशेषताहरू) | -40 °C ... 125 °C |
| व्यक्तिगत तारको स्ट्रिपिङ लम्बाइ (परिवेशको अवस्था) | 16 mm |
| UL ९४ अनुसार ज्वलनशीलता मूल्याङ्कन (यांत्रिक विशेषताहरू) | V0 |
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
स्थापना र सञ्चालन मार्गनिर्देश