स्टकमा उपलब्ध लोकप्रिय उत्पादन

HC-M-02-MOD-BU

HC-M-02-MOD-BU 1679359 PHOENIX CONTACT HEAVYCON contact insert module, female, 2-pos., axial screw connection

$0.00USD

4412 स्टकमा

मुख्य विशिष्टताहरू

:Note regarding axial connection technology:Only for stranded wires. The conductor cross sections stated refer to the geometric cross section of the cable used.Use of cables with a geometric cross section very different from that of the cable's nominal cross section should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 class 5. Deviating cable structures (e.g. class 6 cables) should be checked before use.ConnectionBefore starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The cores should be slid to the limit stop in the contact chamber (until insulation touches contact). Hold cores in position and use socket wrench to tighten. The used core end should be cut off before connecting again. The connection screw may only be retightened once to prevent the strands from breaking. To prevent damage to the contact, the core / cable should be mechanically intercepted at an appropriate distance from the connection point (e.g. by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly.

चौडाइ:34.2 mm

उचाइ:40.6 mm

लम्बाइ:14.6 mm

आपूर्तिकर्ता जानकारी

उत्पादहरू: 0

सामान्यतया २-३ कार्यदिवसभित्र पठाइन्छ

गुणस्तर ग्यारेन्टी

छिटो शिपिङ

प्राविधिक सहयोग

प्राविधिक विशिष्टताहरू

प्यारामीटर	मूल्य
	Note regarding axial connection technology:Only for stranded wires. The conductor cross sections stated refer to the geometric cross section of the cable used.Use of cables with a geometric cross section very different from that of the cable's nominal cross section should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 class 5. Deviating cable structures (e.g. class 6 cables) should be checked before use.ConnectionBefore starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The cores should be slid to the limit stop in the contact chamber (until insulation touches contact). Hold cores in position and use socket wrench to tighten. The used core end should be cut off before connecting again. The connection screw may only be retightened once to prevent the strands from breaking. To prevent damage to the contact, the core / cable should be mechanically intercepted at an appropriate distance from the connection point (e.g. by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly.
चौडाइ	34.2 mm
उचाइ	40.6 mm
लम्बाइ	14.6 mm
शृङ्खला	HC-M-02
सामान्य जानकारी	For HEAVYCON housing type B6 to B48, HC-M-MHR... hinged retaining frame required
आवेदन	Power
उत्पादनको प्रकार	Modular contact insert
विधानसभा नोट	- Connection of the wires using a 2 mm Allen wrench.- Housing height ≥ 52 mm.- Axial screw connection only for flexible wires.- Plug-in connections may only be operated only when there is no load/voltage.
मूल्याङ्कन गरिएको वर्तमान	40 A
सम्पर्क सामग्री	Copper alloy
षट्कोणीय सकेट	SW 2
सम्पर्क नम्बरिङ	1 - 2
टर्क कस्दै	1.5 Nm (2.5 mm² ... 4 mm²)
जडान प्रोफाइल	2
प्रदूषणको डिग्री	3
आयामी रेखाचित्र
पदहरूको संख्या	2
मूल्याङ्कन गरिएको वृद्धि भोल्टेज	8 kV
ओभरभोल्टेज श्रेणी	III
जडान प्रविधि	Axial screw connection
मूल्याङ्कन गरिएको भोल्टेज (III/3)	1000 V
मोड्युल स्लटहरूको संख्या	1
कन्डक्टर क्रस सेक्सन	2.5 mm² ... 8 mm² (The cross section specification refers to the geometric cross section of the cable used)
सम्पर्क वाहक सामग्री	PC
सम्पर्क सतह सामग्री	Ag
सम्मिलन/निकासी चक्रहरू	≥ 500
जडान क्रस सेक्सन AWG	12 ... 10
परिवेशको तापक्रम (सञ्चालन)	-40 °C ... 125 °C
मानक अनुसार जडान	IEC / EN
UL ९४ अनुसार ज्वलनशीलता मूल्याङ्कन	V0
व्यक्तिगत तारको स्ट्रिपिङ लम्बाइ	8 mm +1 mm (for 6 mm²)