GS15U-5P1J

15W AC-DCIndustrialAdaptorGS15Useries 15W AC-DCIndustrialAdaptorGS15Useries15W AC-DCIndustrialAdaptorGS15UseriesFeatures : Features :Features : UniversalAC input / Full range UniversalAC input / Full rangeUniversalAC input / Full range 2 pole USA plug 2 pole USA plug2 pole USA plug No load powerconsumption <0.075 W No load powerconsumption <0.075 WNo load powerconsumption <0.075 W The Energy Efficiency Level Of The Energy Efficiency Level OfThe Energy Efficiency Level Of To comply with EISA 2007/us DoE To comply with EISA 2007/us DoETo comply with EISA 2007/us DoE Class II power(without earthpin) Class II power(without earthpin)Class II power(without earthpin) Protections: short circuit / Overload / Over voltage Protections: short circuit / Overload / Over voltageProtections: short circuit / Overload / Over voltage Pass LPS Pass LPSPass LPS Fully enclosed plastic case Fully enclosed plastic caseFully enclosed plastic case 2 years warranty 2 years warranty2 years warranty SPECIFICATION SPECIFICATIONSPECIFICATION ORDER NO. ORDER NO.ORDER NO. SECURITY MODEL NO. SECURITY MODEL NO.SECURITY MODEL NO. GS15U-1P1J GS15U-11P1J GS15U-2P1J GS15U-3P1J GS15U-4P1J GS15U-5P1J GS15U-6P1J GS15U-8P1J GS15U-1P1J GS15U-11P1J GS15U-2P1J GS15U-3P1J GS15U-4P1J GS15U-5P1J GS15U-6P1J GS15U-8P1JGS15U-1P1J GS15U-11P1J GS15U-2P1J GS15U-3P1J GS15U-4P1J GS15U-5P1J GS15U-6P1J GS15U-8P1J GS15U-1 GS15U-1-1GS15U-2 GS15U-3 GS15U-4 GS15U-5 GS15U-6 GS15U-8 GS15U-1 GS15U-1-1GS15U-2 GS15U-3 GS15U-4 GS15U-5 GS15U-6 GS15U-8GS15U-1 GS15U-1-1GS15U-2 GS15U-3 GS15U-4 GS15U-5 GS15U-6 GS15U-8 DC VOLTAGENote.25V 7.5 V, 9V 12V15V18V24V48V DC VOLTAGENote.25V 7.5 V, 9V 12V15V18V24V48VDC VOLTAGENote.25V 7.5 V, 9V 12V15V18V24V48VOUTPUT OUTPUTOUTPUT RATED CURRENT CURRENT RANGE RATED POWER RATED CURRENT CURRENT RANGE RATED POWERRATED CURRENT CURRENT RANGE RATED POWER 2.40 A 1.60 A 1.66 A 1.25 A 1.00 A 0.83 A 0.625 A 0.31 A 2.40 A 1.60 A 1.66 A 1.25 A 1.00 A 0.83 A 0.625 A 0.31 A2.40 A 1.60 A 1.66 A 1.25 A 1.00 A 0.83 A 0.625 A 0.31 A 0 ~ 2.40 0 ~ 1.60 0 ~1.66A0 ~ 1.25 0 ~ 1.00 0 ~ 0.83 0 ~ 0.625 0 ~ 0.31 A 0 ~ 2.40 0 ~ 1.60 0 ~1.66A0 ~ 1.25 0 ~ 1.00 0 ~ 0.83 0 ~ 0.625 0 ~ 0.31 A0 ~ 2.40 0 ~ 1.60 0 ~1.66A0 ~ 1.25 0 ~ 1.00 0 ~ 0.83 0 ~ 0.625 0 ~ 0.31 A 12W 12W 15W 15W 15W 15W 15W 15W 12W 12W 15W 15W 15W 15W 15W 15W12W 12W 15W 15W 15W 15W 15W 15W RIPPLE & NOISE (max.) Note.350mVp-p80mVp-p80mVp-p80mVp-p100mVp-p120mVp-p150mVp-p240mVp-p RIPPLE & NOISE (max.) Note.350mVp-p80mVp-p80mVp-p80mVp-p100mVp-p120mVp-p150mVp-p240mVp-pRIPPLE & NOISE (max.) Note.350mVp-p80mVp-p80mVp-p80mVp-p100mVp-p120mVp-p150mVp-p240mVp-p VOLTAGE TOLERANCE Note.45.0% VOLTAGE TOLERANCE Note.45.0%VOLTAGE TOLERANCE Note.45.0% 5.0% 5.0%5.0% 5.0% 5.0%5.0% 3.0% 3.0%3.0% 3.0% 3.0%3.0% 3.0% 3.0%3.0% 2.0%2.0% 2.0%2.0%2.0%2.0% LINE REGULATIONNote.5 0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5% LINE REGULATIONNote.5 0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5%LINE REGULATIONNote.5 0.5%0.5%0.5%0.5%0.5%0.5%0.5%0.5% LOAD REGULATIONNote.6 5.0% LOAD REGULATIONNote.6 5.0%LOAD REGULATIONNote.6 5.0% 5.0% 5.0%5.0% 5.0% 5.0%5.0% 3.0% 3.0%3.0% 3.0% 3.0%3.0% 3.0% 3.0%3.0% 2.0% 2.0%2.0% 2.0% 2.0%2.0% INPUT INPUTINPUTPROTECTION PROTECTIONPROTECTION ENVIRONMENT ENVIRONMENTENVIRONMENTSAFETY & EMC SAFETY AND EMCSAFETY AND EMC (Note. 7) (Note. 7)(Note. 7) OTHER CONNECTOR OTHER CONNECTOROTHER CONNECTOR The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.)The INSTALLATION program, PLACE, TIME VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC POWER AC POWERAC POWER Input CURRENT (max.) The LEAKAGE CURRENT(max.) Input CURRENT (max.) The LEAKAGE CURRENT(max.)Input CURRENT (max.) The LEAKAGE CURRENT(max.)The OVERHEAD of The OVERHEAD ofOVERLOADOVER VOLTAGE WORKING TEMP. OVER VOLTAGE WORKING TEMP.OVER VOLTAGE WORKING TEMP. OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION OPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATIONOPERATING HUMIDITY STORAGE TEMPERATURE, HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION SAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSIONSAFETY STANDARDS VOLTAGE RESISTANCE ISOLATION RESISTANCE EMC EMISSION MTBF DIMENSION PACKING PLUG MTBF DIMENSION PACKING PLUGMTBF DIMENSION PACKING PLUG CABLE CABLECABLE 3000ms, 50ms, 16msat full load 3000ms, 50ms, 16msat full load3000ms, 50ms, 16msat full load 90 ~ 264VAC 135 ~ 370VDC 90 ~ 264VAC 135 ~ 370VDC90 ~ 264VAC 135 ~ 370VDC 47 ~ 63Hz 47 ~ 63Hz47 ~ 63Hz 80%82.5%85%85%85%85%85.5%87% 80%82.5%85%85%85%85%85.5%87%80%82.5%85%85%85%85%85.5%87% 0.5 A / 100VAC 0.5 A / 100VAC0.5 A / 100VAC 50A /230VAC 50A /230VAC50A /230VAC 0.25 mA / 240VAC 0.25 mA / 240VAC0.25 mA / 240VAC 105 ~ 250%rated output power 105 ~ 250%rated output power105 ~ 250%rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed Protection type : Hiccup mode, recovers automatically after fault condition is removedProtection type : Hiccup mode, recovers automatically after fault condition is removed >120% of the nominal output voltage >120% of the nominal output voltage>120% of the nominal output voltage Protection type : Clamp by zener diode Protection type : Clamp by zener diodeProtection type : Clamp by zener diode 0 ~ +50 (Refer to "Reduction Curve") 0 ~ +50 (Refer to "Reduction Curve")0 ~ +50 (Refer to "Reduction Curve") 20% ~ 90% RH non-condensing 20% ~ 90% RH non-condensing20% ~ 90% RH non-condensing -20 ~ +85, 10 ~ 95% RH -20 ~ +85, 10 ~ 95% RH-20 ~ +85, 10 ~ 95% RH 0.03%/(0 ~ 40) 0.03%/(0 ~ 40)0.03%/(0 ~ 40) 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes 10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes10 ~ 500Hz, 2G 10min./1cycle, period for 60 min. each along X, y, Z axes UL60950-1, CSA C22.2 approved UL60950-1, CSA C22.2 approvedUL60950-1, CSA C22.2 approved I/P-O/P:3KVAC I/P-O/P:3KVACI/P-O/P:3KVAC I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance FCC part 15 Class B I/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance FCC part 15 Class BI/P-O/P:100M Ohms / 500VDC / 25/ 70% RH Compliance FCC part 15 Class B 500Khrs min.MIL-HDBK-217F(25) 500Khrs min.MIL-HDBK-217F(25)500Khrs min.MIL-HDBK-217F(25) 34*71*50mm (L*W*H) 34*71*50mm (L*W*H)34*71*50mm (L*W*H) 150g ; 84pcs / 14Kg / CARTON 150g ; 84pcs / 14Kg / CARTON150g ; 84pcs / 14Kg / CARTON See page 2; Other type available by customer requested See page 2; Other type available by customer requestedSee page 2; Other type available by customer requested See page 2; Other type available by customer requested See page 2; Other type available by customer requestedSee page 2; Other type available by customer requested NOTE NOTENOTE 1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient. 1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient.1.All parameters are specified at 115VAC input, rated load, 25 70% rh ambient. 2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load. 2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load.2.DC voltage:The output of voltageset in the point measure by plug terminal & 50% load. 3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf.3.Ripple and noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1 uf and capacitor of 47uf. 4.Tolerance: includes set up tolerance, line regulation, load regulation. 4.Tolerance: includes set up tolerance, line regulation, load regulation.4.Tolerance: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 5.Line regulation is measured from low line to high line at rated load.5.Line regulation is measured from low line to high line at rated load. 6.Loadregulation is measured from 0% to 100% ratedload. 6.Loadregulation is measured from 0% to 100% ratedload.6.Loadregulation is measured from 0% to 100% ratedload. 7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the 7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the7.The power supply is considered as a separate unit, in the end, but the team still needs to re-confirm that the system complies with the EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies."EMC directives. For information on how to perform these EMC tests, please refer to "EMI testingof component powersupplies." (asavailable in http://www.meanwell.com) (asavailable in http://www.meanwell.com)(asavailable in http://www.meanwell.com)File Name:GS15U-SPEC2015-10-02 File name:GS15U-SPEC2015-10-02File name:GS15U-SPEC2015-10-02