GP34829091724

Dupline®Carpark MonitorType GP34829091724-x• Monitor module for the L1 bus and the L2 bus• GP34829091724 is able to handle 120 sensors for eachmonitor modul on the L1 bus• GP34829091724-1 is able to handle 60 sensors for eachmonitor modul on the L1 bus• Possible to install 480 monitors in a system• One or several displays can be connected to the built-inRS485• Output function on the L2 bus for e.g. gate control• Booking function for 3-colour sensors in cooper- ation with the Dupline CarPark Software. Only GP34829091724-1• H4-Housing• Programmed with the Carpark configurator GP73800080• Termination switch for RS485 on the front• cULus approvedProduct DescriptionOrdering KeyGP34829091724The Carpark monitor GP 34829091 is a part of the Dupline® Carpark concept. It is the intel- ligent part of the system. The monitor GP 3482 9091 havetwoindependent bussesL1 and L2. The L1bus is connect- ed to the sensors and the L2is connected to other monitorIt is possible to connect one or several displays on the RS485 bus. The Carpark monitor is programmed with the Carpark configurator GP 7380 0080.The GP34829091724-1 is designed toworkonlywith3-colour sensorsand theDupline® Carpark Software.Type: Dupline® CarparkH4-HousingType SelectionOrdering no.modules.Carpark Monitor GP34829091724Carpark Monitor withbooking functionGP34829091724-1Output SpecificationsOutputRS 485Gnd on pin 22A on pin 27B on pin 28CommunicationStandard RS 485Baudrate 4800Dielectric voltageRS485 - Dupline®L1+L2 500 VAC (rms) ProtokolCarparkSupply SpecificationsPrimary bus L120-30 VDC pulsating(3-wire Dupline® bus)L1 busDupline®+ pin 21Dupline®- pin 22Power pin 23Current consumption≤ 27 mA ± 10%Current consumption Dupline®< 0.03 mA (High impedance)Primary bus L220-30 VDC pulsating(3-wire Dupline® bus)L2 busDupline®+ pin 24Dupline®- pin 25Power pin 26Current consumption≤ 8 mA ± 10%Current consumption Dupline®< 0.03 mA (High impedance)Power dissipation ≤ 1 WDielectric VoltageDupline® L1 - Dupline® L2500 VAC (rms)General SpecificationsProgrammingBy GP73800080EnvironmentDegree of protection IP20 BOperating temperature-40° to +50°C (-40° to +122°F) Storage temperature -50° to +85°C (-58° to +185°F)Humidity (non-condensing)20 to 95%Mechanical resistanceShock15 G (11 ms) Vibration 2 G (6 to 55 Hz)DimensionsH4-housingLEDGreen LEDPower ONFirst yellow LEDDupline®bus L1Second yellow LEDDupline®bus L2EMC performance EN61000-6-3 (emission) EN61000-6-1 (immunity)Power-on delay 3 sec.Termination switch for RS485The switch on the front of the monitor, turns the built- in resistor on 120Ω ON or OFF.ApprovalcULus (UL60950)MTBF100,000 hoursSpecifications are subject to change without notice (21.11.2014) 1