G34960010700

Dupline® Plug & Play Master Module Interface forSiemens Simatic S7-200 PLC Type G 3496 0010• Interface for Siemens Simatic S7-200 PLCwith the function of a master• Plug and play: Automatic communication with specificPLC/Controllers• Built-in normal Dupline® Channel Generator• 128 I/O’s and DC power supply on 3 wires• RS232/RS422/RS485 port for interfacing to control sys- tem• Split-I/O mode selectable (128 inputs and 128 outputs)• LED-indications for supply, Dupline® carrier and Com- port TX• Galvanically isolated Com-port supplied by internal DC/ DC converterProduct DescriptionOrdering KeyG 3496 0010 700G 3496 0010 is designed as a cost-effective solution for interfacing Dupline® I/O’sto the Siemens Simatic S7-200PLC family. It performs three functions:Dupline®channelgenerator, power supply syn- chronization(enables 3-wire system with supply) and RS232/RS422/RS485 inter- face.Type: Dupline® H4-Housing Combined module Interface typeDC supplyType SelectionSupplyPLC Interface Conformance Ordering no.20-30 VDCSiemens Simatic S7-200 PLC family G 3496 0010 700Input/Output SpecificationsPower OutputOutput voltage20-30 VDC (pulsating)Output current< 3.0 A @ 50°CShort circuit protection 4 A quick acting fuseOutput voltage drop < 1.0 VDupline®carrierOutput voltage8.2 V (pulsating)Current < 60 mAShort circuit protection YesScan time128 channels132.2 ms64 channels69.8 msCommunication PortStandard RS232/RS422/RS485Connection 9 pole female Sub-DDielectric voltageCom-port - Dupline® 1 kVAC (rms)ProtocolModbus-RTU (functioncode 03 and 16Channel Configuration in PLCBaud rate9600Data bits 8Start bit 1Stop bit 1ParityNoneFlow-controlNonePin assignment2-wire RS485S/R Data line+ (B)3S/R Data line– (A)8GND 5Input/Output Specifications (Cont.)4-wire RS485/RS422R Data line + (B)3R Data line - (A) 8S Data line + (B)2S Data line - (A) 7Direction 4 (Connect pin 5 to GNDwhen using 4-wire com.)RS232TX 1RX9GND 5Supply SpecificationsPower supplyOvervoltage cat. III (IEC 60664)Operational voltage (Vin) 20-30 VDC Reverse polarity protectionNoneCurrent consumption< 150 mA + Power loadPower dissipation < 5 W Transient protection voltage800 V Dielectric voltageSupply – Dupline®NoneSupply – Com-port 1 kVAC (rms)Note: Use individual power supplies for all G349600xx700, as the input are not galvanic isolated from each other.Specifications are subject to change without notice (05.12.2014)1