G34960007700

Dupline® Plug & Play Master ModuleInterface forSchneider (Telemecanique & Modicon) PLCType G 3496 0007• Schneider (Telemecanique & Modicon) Slave• Plug and play: Automatic communication with specificPLC/Controllers• Built-in normal Dupline® Channel Generator• 128 I/O’s and DC power supply on 3 wires• RS485 port for interfacing to control system• Split-I/O mode selectable (128 inputs and 128 outputs)• LED-indications for supply, Dupline® carrier and Com- port TX• Galvaniccally isolated Com-port supplied by internalDC/DC converterProduct DescriptionOrdering KeyG 3496 0007 700G 3495 0007 is designed as a cost-effectivesolutionfor interfacing Dupline® I/O’s to allSchneiderPLCs– the Telemecanique and Modicon families.Itperformsthreefunctions: Dupline®channel generator, power supply syn- chronization (enables 3-wire system with supply) and RS485 interface.Type: Dupline® H4-Housing Combined module Interface typeDC supplyType SelectionSupplyPLC Interface Conformance Ordering no.20-30 VDCSchneider, Telemecanique and Modicon.G 3496 0007 700Input/Output SpecificationsPower OutputOutput voltage20-30 VDC (pulsating)Output current< 3.0 A @ 50°CShort circuit protection 4 A quick acting fuseOutput voltage drop < 1.0 VDupline®carrierOutput voltage8.2 V (pulsating)Current < 60 mAShort circuit protection YesScan time128 channels132.2 ms64 channels69.8 msCommunication PortStandard RS485Connection 9 pole female Sub-DDielectric voltageCom-port-Dupline®1 kVAC (rms)ProtocolUnitelway V2Channel Configuration in PLCBaud rate 9600Data bits 8Start bit -Stop bit 1ParityOddFlow-controlNonePin assignmentRS485A 8B 3GND 5Supply SpecificationsPower supplyOvervoltage cat. III (IEC 60664) Operational voltage (Vin)20-30 VDCReverse polarity protectionNoneCurrent consumption< 150 mA + Power loadPower dissipation < 5 W Transient protection voltage800 V Dielectric voltageSupply – Dupline® NoneSupply – Com-port 1 kVAC (rms)Note: Use individual power supplies for all G349600xx700, as the input are not galvanic isolated from each other.General SpecificationsPower ON delay2 sIndication forCom-port TX LED, red Supply ON LED, green Dupline® carrier LED, yellowEnvironmentPollution degree2 (IEC 60664)Operating temperature0° to +50°C (+32° to +122°F) Storage temperature -50° to +85°C (-58° to +185°F)Humidity (non-condensing) 20 to 80%Mechanical resistanceShock15 G (11 ms) Vibration2 G (6 to 55 Hz)Dimensions H4-HousingWeight100 gSpecifications are subject to change without notice (04.12.2014)1