G34960003700

Dupline® Plug & Play Master ModuleInterface forMitsubishi PLC Type G 3496 0003• Interface for Mitsubishi PLC with the function of a master• Plug and play: Automatic communication with specificPLC/Controllers• Built-in normal Dupline®Channel Generator• 128 I/O’s and DC power supply on 3 wires• RS232/RS422/RS485 port for interfacing to control system• Split-I/O mode selectable (128 inputs and 128 outputs)• LED-indications for supply, Dupline®carrier and Com- port TX• Galvanically isolated Com-port supplied by internalDC/DC converterProduct DescriptionOrdering KeyG 3496 0003 700G 3496 0003 is designed as a cost-effectivesolutionfor interfacing Dupline® I/O’s to a Mitsubishi PLC. It performs three functions: Dupline®channel generator, power supply synchronization (enables 3-wire system with supply) and RS232/RS422/ RS485 interface.Type: Dupline® H4-Housing Combined module Interface typeDC supplyType SelectionSupplyPLC Interface Conformance Ordering no.20-30 VDCMitsubishi FX-serie G 3496 0003 700Mitsubishi AnS-serie with interface moduleInput/Output SpecificationsPower outputOutput voltage20-30 VDC (pulsating) Output current< 3.0 A @ 50ºCShort circuit protection 4 A quick acting fuseOutput voltage drop < 1.0 VDupline®carrierOutput voltage8.2 V (pulsating) Current < 60 mAShort circuit protection YesScan time128 channels132.2 ms64 channels 69.8 msCommunication portInput/Output Specifications (Cont.)Pin assignment2-wire RS 485S/R Data line + (B)Pin 3S/R Data line - (A) Pin 8GND Pin 54-wire RS 485/RS 422R Data line + (B)Pin 3R Data line - (A) Pin 8S Data line + (B)Pin 2S Data line - (A) Pin 7Direction Pin 4(Connect to GND pin 5 when using 4-wire commu-Standard RS232/RS422/RS485RS 232nication)Split I/O modeYes, selectable Normal Dupline modeYes, selectable Connection 9 pole female Sub-D Dielectric voltageCom-port Dupline® 1 kVAC (rms) ProtocolProgramming PortBaud rate 9600Data bits 7Start bit 1Stop bit 1ParityEvenFlow-controlNoneProtocolDedicated ProtocolBaud rate 19200Data bits 8Start bit 1Stop bit 1ParityNoneFlow-controlNoneTXPin 1RXPin 9GND Pin 5Supply SpecificationsPower supplyOvervoltage cat. III (IEC 60664) Operational voltage (Vin) 20-30 VDCReverse polarity protectionNoneCurrent consumption< 150 mA + Power loadPower dissipation < 5 W Transient protection voltage800 V Dielectric voltageSupply - Dupline® NoneSupply - com-port1 kVAC (rms)Note: Use individual power supplies for all G349600xx700, as the input are not galvanic isolated from each other.Specifications are subject to change without notice (04.12.2014)1