

| प्यारामीटर | मूल्य |
|---|---|
| 7 Nm (Support: EN 62444) | |
| रङ | Brass color |
| ढालिएको | yes |
| आवेदन | EMC |
| हलोजन-रहित | no |
| निर्माता | BIMED |
| उत्पादनको प्रकार | Cable screw gland |
| थ्रेड पिच | 1.5 mm |
| विधानसभा नोट | Method 1Cut the outer sheath, but do not remove it. Feed the cable through the screw connection and then remove the outer sheath. Now pull the cable back until the connection is established between the cable shield and the contact spring.Method 2Push the braided shield back around 15 ... 20 mm over the outer sheath. Insert the cables into the screw connection until the connection is established between the cable shield and the contact spring. |
| प्वालको व्यास | 16.1 mm ... 16.2 mm |
| लेख संशोधन | 00 |
| टर्क कस्दै | 7 Nm (Union nut) |
| आयामी रेखाचित्र | |
| सुरक्षाको डिग्री | IP68 (5 bar, 30 minutes) |
| सिल सामग्री ओ-रिंग | Perbunan |
| रेन्चको आकार, समर्थन | 20 mm |
| डिजाइन, तनाव राहत | A |
| रेन्चको आकार, युनियन नट | 20 mm |
| संलग्न मूल्याङ्कन (NEMA) | 4X |
| बाह्य केबल व्यास | 5 mm ... 10 mm |
| झट्का प्रभावको वर्ग | 6 |
| निर्माता पदनाम | BMEM-E1 |
| सिल सामग्री केबल सिल | CR |
| षट्कोण कोणीय आयाम | 22 mm |
| सामग्री सङ्कुचन रिंग | PA 6 |
| थ्रेड प्रकार जडान पक्ष | M16 x 1.5 |
| स्क्रू जडानको लागि सामग्री | Brass, nickel-plated |
| तनाव राहतको कार्यान्वयन | A |
| परिवेशको तापक्रम (सञ्चालन) | -40 °C ... 100 °C (static) |
| जडान गर्ने धागोको लम्बाइ | 7 mm |
| केबल म्यान बिना केबल व्यास | 4 mm (Diameter of braided shield) |
| स्ट्रेन रिलिफ क्लिपको क्ल्याम्पिङ दायरा | 6.00 mm ... 10.00 mm (for UL 514 B) |
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
स्थापना र सञ्चालन मार्गनिर्देश