स्टकमा उपलब्ध लोकप्रिय उत्पादन
FM-214-4-P
FM-214-4-P PANASONIC flow sensor FM200, 10l/minø4,PNP
$0.00USD
4304 स्टकमा
मुख्य विशिष्टताहरू
वस्तु:Specifications
तौल:Net weight: 50 g approx., Gross weight: 115 g approx.
विवरणहरू:Resin body type
प्रदर्शन:4 digits + 4 digits 2-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation)
आपूर्तिकर्ता जानकारी
PANASONIC
उत्पादहरू: 4316
सामान्यतया २-३ कार्यदिवसभित्र पठाइन्छ
गुणस्तर ग्यारेन्टी
छिटो शिपिङ
प्राविधिक सहयोग
प्राविधिक विशिष्टताहरू
| प्यारामीटर | मूल्य |
|---|---|
| वस्तु | Specifications |
| तौल | Net weight: 50 g approx., Gross weight: 115 g approx. |
| विवरणहरू | Resin body type |
| प्रदर्शन | 4 digits + 4 digits 2-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation) |
| उत्पादन | Integrated Display Type Digital Flow Sensor |
| सामाग्री | Enclosure: ABS, Body: Polyamide (Aluminum body type: Aluminum), Switch: EPDM, Display: Acrylic, Mounting screw part (Resin body type): Brass Current plate / Port filter: Stainless steel (used for the gas contact area), Sensor chip: Silicon, Gasket: Fluorine rubber |
| रेखीयता | Within ±3 % F.S. (Ambient temperature +25 ℃ +77 ℉, flow rate range 3 to 100 % F.S., atmospheric criteria on secondary side) |
| पोर्ट आकार | ø4 ø0.157 push-in |
| सुरक्षा | IP40 (IEC) |
| सामानहरू | CN-F15-C1 (Connector attached cable 1 m 3.281 ft): 1 pc. |
| भाग नम्बर | FM-214-4-P |
| केबल लम्बाइ | Total length up to 10 m 32.808 ft is possible with 0.3 mm2, or more, cable. |
| उत्पादनको नाम | Integrated Display Type Digital Flow Sensor FM-200 |
| दोहोरिने क्षमता | Within ±1 % F.S. |
| बाह्य इनपुट | ON voltage: +5 V to +VOFF voltage: 0 to +0.6 V, or openInput time: 80 ms or more |
| उत्पादन नम्बर | FM-214-4-P |
| आपूर्ति भोल्टेज | 12 to 24 V DC ± 10 % Ripple P-P10 % or less |
| परिवेशको आर्द्रता | 35 to 90 % RH, Storage: 35 to 90 % RH |
| लागू हुने तरल पदार्थ | Clean air, compressed air, nitrogen gas(Note):The clean air complies with JIS B 8392-1.1.1 to 5.6.2, and the compressed air complies with JIS B 8392-1.1.1 to 1.6.2. |
| झट्का प्रतिरोध | 100 m/s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| जडान विधि | Connector |
| तुलनात्मक आउटपुट | PNP open-collector transistor・Maximum source current: 50 m A or less・Applied voltage: 26.4 V DC or less(between comparative output and +V)・Residual voltage: 2.4 V or less (at 50 mA source current) |
| घेराको अर्थिङ | Floating(Note):As a varistor (clamping voltage: approx. 40 V) is connected to the aluminum body type, do not apply voltage higher than the rated voltage of the sensor. |
| परिवेशको तापक्रम | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage: -10 to +60 ℃ +14 to +140 ℉ |
| हालको खपत | Normal mode: 60 mA or less, ECO mode: 40 mA or less |
| पूर्ण स्केल प्रवाह दर | 10 ℓ/min.(Note):Converted to volumetric flow at +20 ℃ +68 ℉ and 1 atmospheric pressure (101 kPa). |
| मूल्याङ्कन गरिएको दबाव दायरा | -0.09 to +0.7 MPa |
| कम्पन प्रतिरोध | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude or 49 m/s2max. acceleration, in X, Y and Z directions for two hours each |
| एनालग भोल्टेज आउटपुट | Output voltage: 1 to 5 V, Output impedance: 1 kΩ approx.[Refer to "Analog voltage output" for more details.] |
| इन्सुलेशन प्रतिरोध | 10 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure (Excluding the aluminum body type) |
| शुद्धता आश्वासन दायरा | Bi-direction : -100 to -3 % F.S., +3 to +100 % F.S.One-side direction : +3 to +100 % F.S.(Note):Take care that if fluid flows in the vicinity of zero-point which is out of the accuracy assurance range, the instant flow rate value may forcibly display "zero", or the integrated flow display value may not be counted up, or the integrated pulse output may not be outputted. |
| दबाब विशेषताहरू | Within ±5 % F.S. (-0.09 to +0.7 MPa, +25 ℃ +77 ℉, atmospheric criteria on secondary side) |
| भोल्टेज सहनशीलता | 1,000 V AC for one min. between all supply terminals connected together and enclosure (Excluding the aluminum body type) |
| दबाब सहनशीलता | 1 MPa |
| निर्दिष्ट एकीकृत मान | 0.1 ℓ |
| तापक्रम विशेषताहरू | Within ±0.2 % F.S./℃ (+25 ℃ +77 ℉ criteria, +15 to +35 ℃ +59 to +95 ℉ ambient temperature range) |
| तुलनात्मक आउटपुट: हिस्टेरेसिस | Window comparator mode: 1 to 8 % F.S. approx. (variable) (Factory settings: approx. 1 % F.S.), Hysteresis mode: Variable (minimum 1 digit) |
| सीई मार्किंग निर्देशन अनुपालन | EMC Directive, RoHS Directive |
| तुलनात्मक आउटपुट: आउटपुट मोडहरू | Output OFF mode, window comparator mode, hysteresis mode, integrated output mode, integrated pulse output mode |
| तत्काल प्रवाह दर: प्रदर्शन दायरा | -11 to +11 ℓ/min.(Note):The display flow rate range is the case when setting to bi-direction at the flow direction setting. When the flow direction is set to one-side forward direction or one-side reverse direction, the negative side of the display flow rate range shows 10 % of the full-scale (F.S.). |
| तुलनात्मक आउटपुट: प्रतिक्रिया समय | 50 ms, 80 ms, 120 ms, 200 ms, 400 ms, 800 ms, 1,500 ms, selectable by key operation |
| एकीकृत प्रवाह दर: प्रदर्शन दायरा | ±99999.99 ℓ(Note):The display flow rate range is the case when setting to bi-direction at the flow direction setting. When the flow direction is set to one-side forward direction or one-side reverse direction, the negative side of the display flow rate range shows 10 % of the full-scale (F.S.). |
| तुलनात्मक आउटपुट: सर्ट-सर्किट सुरक्षा | Incorporated |
| तत्काल प्रवाह दर: सेटिङ र प्रदर्शन रिजोल्युसन | 0.01 ℓ/min. |
| एकीकृत प्रवाह दर: सेटिङ र प्रदर्शन रिजोल्युसन | 0.01 ℓ |
उत्पादन विवरण
More details
मुख्य विशेषताहरू
- औद्योगिक स्तरको गुणस्तर
- RoHS अनुरूप
- सीई प्रमाणित
- १-वर्षीय वारंटी
उत्पादन कागजातहरू
डेटासिट
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
प्रयोगकर्ता म्यानुअल
स्थापना र सञ्चालन मार्गनिर्देश
