


| प्यारामीटर | मूल्य |
|---|---|
| नाम | ELG-200-48B |
| राज्य | Do not Use for New Designs |
| ढाँचा | Box |
| शृङ्खला | ELG-200-V-B |
| मधुरो पार्दै | 0-10V, 1-10V, Resistance 0-100K, PWM Signal 10V |
| अनुमोदनहरू | CCC, CE, EAC, ENEC, KCC, MM, RCM, UL |
| पावर (W) | 199,60 |
| उपढाँचा | IP67 |
| चौडाइ (मिमी) | 71.00 |
| उचाइ (मिमी) | 37.50 |
| एसी इनपुट अधिकतम | 305,00 |
| न्यूनतम एसी इनपुट | 100,00 |
| अनुप्रयोगहरू | Lighting |
| निर्माता | MEAN WELL |
| उत्पादनको प्रकार | LED Driver |
| आइसोलेसन (V) | 3.750,00 |
| अधिकतम शक्ति (W) | 199.6 |
| इनपुट कनेक्टर | Cable |
| इनपुट फ्रिक्वेन्सी | 50 Hz, 60 Hz |
| लामो/पृष्ठभूमि | 244.00 |
| लामो विवरण | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in metal box sealedIP67.Input range100-305Vca47-63Hz.Output in constant current4,16A.Range of output voltage with current mode constantTwenty fourto 48vdcaccording to demand load.Power:199,6 W.Efficiency typical:93%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10V,a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class I with grounding.Factor corrector, power>0.95to 230vac at full load.Consumption without load <0.5 W.Operating temperature range of caseTcfrom-40ºCup+90ºC.Dimensions (Length x Width x Height):244 x 71 x 37.5 mm5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source works on a constant current when we connect the LEDs directly to have a voltage within the range of output voltage mode constant current and a working current equal to the output current.The series ELG are LED drivers, class I grounded. The own metal box serves to connect the ground of security. You can ask for a version with ground cable from the input (3 wires) by adding-3Y at the end of the model. For example ELG-200-48B-3Y.You can also work in voltage mode constant giving a fixed voltage of 48V if the load is powered at constant voltage and does not overcome the maximum output power.With metal housing, waterproof to IP67. The series ELG has a high efficiency designed for applications of public lighting, architectural, outdoor or any application of LED lighting need a driver of high quality. Approved HL Class I Division 2 for ex-zones in the US.Can be adjusted by regulatory assets or liabilities0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| आउटपुट कनेक्टर | Cable |
| प्रविष्टि CA को प्रकार | Single-phase |
| वारेन्टी (वर्ष) | 5,00 |
| उत्पत्तिको देश | China |
| आउटपुट वर्तमान mA | Four thousand |
| न्यूनतम आउटपुटको तीव्रता (mA) | 4.160,00 |
| आउटपुट अधिकतमको तीव्रता (mA) | 4.160,00 |
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
स्थापना र सञ्चालन मार्गनिर्देश