


| प्यारामीटर | मूल्य |
|---|---|
| Fiber amplifierconnector | |
| वस्तु | Functions |
| आकार | Type |
| कार्यहरू | Power tuning |
| पूर्व-वायर्ड | AND/OR output |
| NPN आउटपुट | PNP output |
| I/O सेटिङहरू | Output setting (select from channel 2 output, AND, OR, leading edge sync, falling edge sync, or differential output) |
| प्रतिक्रिया समय | Super-high-speed mode |
| मानक मोड | 1 ms for operation and reset respectively |
| टाइमर प्रकार्य | Select from OFF-delay, ON-delay, or one-shot timer.1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 10-ms increments,200 ms to 1 s set in 100-ms increments, and 1 to 5 s set in 1 s-increments) |
| डिजिटल डिस्प्लेहरू | Select from the following: Incident level for channel 1 + incident level for channel 2, Incident level + threshold, incident level percentage + threshold, incident light peak level + no incident light bottom level, minimum incident light peak level + maximum no incident light bottom level, long bar display, incident level + peak hold, incident level + channel |
| सुरक्षात्मक सर्किटहरू | Power supply reverse polarity protection, output short-circuit protection, mutual interference prevention |
| संवेदनशीलता सेटिङ | Teaching and digital up/down keys |
| सुरक्षाको डिग्री | IEC 60529 IP50 (with protective cover attached) |
| उच्च-रिजोल्युसन मोड | 4 ms for operation and reset respectively |
| विद्युत आपूर्ति भोल्टेज | 12 to 24 VDC±10%, ripple (p-p) 10% max. |
| फाइबर एम्पलीफायर कनेक्टर १ | AND/OR output |
| प्रकाश स्रोत (तरंग लम्बाइ) | Red LED (650 nm) |
| M8 प्लग कनेक्टर भएको ३० सेमी PVC केबल (४ पिन) | E3X-CN21-M3J-2 0.3M |
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
स्थापना र सञ्चालन मार्गनिर्देश