


| प्यारामीटर | मूल्य |
|---|---|
| एनपीएन | - |
| COM3 को परिचय | E3S-DCP21-IL3 |
| वस्तु | Sensing method |
| लेन्स | Methacrylic resin (PMMA) |
| मोडेल | E3S-DCP21-IL2 |
| आउटपुट | Push-pull |
| बटनहरू | Elastomers |
| बाउड दर | E3S-DCP21-IL3: COM3 (230.4 kbps), E3S-DCP21-IL2: COM2 (38.4 kbps) |
| कनेक्टर | Diecast zinc (nickel-plated brass) |
| सामाग्री | Case |
| सूचकहरू | ABS |
| डेटाको लम्बाइ | PD size: 8 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2) |
| प्रतिक्रिया समय | Operate or reset: 50 µs max. for each (2-point teaching mode)Operate or reset: 150 µs max. for each (1-point teaching mode) |
| सेन्सिङ विधि | Appearance |
| सेन्सिङ दूरी | 10±3 mm (White paper 10 ×10 mm) |
| न्यूनतम चक्र समय | E3S-DCP21-IL3 (COM3): 1.5 ms, E3S-DCP21-IL2 (COM2): 4.8 ms |
| सुरक्षा सर्किटहरू | Power supply reverse polarity protection, output short-circuit protection and output incorrect connection protection |
| सुरक्षाको डिग्री | IEC 60529 IP67 |
| विद्युत आपूर्ति भोल्टेज | 10 to 30 VDC±10% (Ripple (p-p) 10% max.) |
| मुख्य IO-Link कार्यहरू | Operation mode switching between NO and NCTimer function of the control output and timer time selecting function (Select a function from disabled, ON delay, OFF delay, one-shot or ON/OFF delay.) (Select a timer time of 1-5000 ms.)Selecting function of ON delay timer time for instability (0 (disabled)-1000 ms)Monitor output function (PD output indicating a relative detection quantity)Energizing time read-out function (unit: h)Initialize the settings function “Restore the factory settings” |
| परिवेशको तापक्रम दायरा | Operating: −10 to 55°C; Storage: −25 to 70°C (with no icing or condensation) |
| प्रकाश स्रोत (तरंगदैर्ध्य) | Red LED (635 nm), Green LED (525 nm), Blue LED (465 nm) |
| स्पट आकार (सन्दर्भ मान) | 1 × 4 mm |
| सञ्चार विशिष्टताहरू | IO-Link specification |
| डिफ्यूज-रिफ्लेक्टिभ (चिन्ह पत्ता लगाउने) |
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
स्थापना र सञ्चालन मार्गनिर्देश