

| प्यारामीटर | मूल्य |
|---|---|
| When connecting the conductor, make sure that the CAPAROC modules are not pulled apart due to tensile force. Gaps must not be created between the modules. | |
| फ्यूज | electronic |
| नोट | LABS release – in accordance with test specification VW PV 3.10.7:2005-0 |
| प्रकारहरू | Plug-in module |
| गहिराई | 111.3 mm (incl. DIN rail 7.5 mm) |
| चौडाइ | 12.4 mm |
| उचाइ | ≤ 4000 m (amsl) |
| सामाग्री | PA 6 |
| प्रभावकारिता | > 99 % |
| उत्पादनको प्रकार | Device circuit breakers |
| भोल्टेज ड्रप | 0.14 V (at 10 A) |
| आर्द्रता परीक्षण | 96 h, 95 % RH, 40 °C |
| माउन्टिङ प्रकार | pluggable onto CAPAROC CR… current rail |
| मूल्याङ्कन गरिएको भोल्टेज | 12 V DC |
| बन्द हुने समय | 5 s (for overload 1.1…1.3 x INat IN≥ 4 A) |
| पहिचान | UL/C-UL Listed UL 508 |
| उत्पादन परिवार | CAPAROC |
| च्यानल LED बन्द छ | off (Channel switched off) |
| च्यानल एलईडी रातो | lit (Channel switched off, over- or undervoltage active) |
| च्यानलहरूको संख्या | 2 |
| स्लटहरूको संख्या | 2 |
| स्विच-अन ढिलाइ | 50 ms (each channel preset by default) |
| ट्रिपिङ विधि | E (electronic) |
| प्रदूषणको डिग्री | 2 |
| सुरक्षा वर्ग | III |
| मूल्याङ्कन गरिएको वर्तमान IN | 10 A DC (per channel) |
| स्ट्रिपिङ लम्बाइ | 10 mm |
| च्यानल एलईडी हरियो | lit (Channel switched on) |
| जडान विधि | Push-in connection |
| क्रस सेक्सन AWG | (converted acc. to IEC) |
| असफल-सुरक्षित तत्व | 15 A DC (per output channel) |
| सञ्चालन भोल्टेज | 10 V DC ... 30 V DC |
| पावर अपव्यय | typ. 0.6 W (no load at 24 V) |
| झट्का (अपरेसन) | 30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27) |
| च्यानल एलईडी पहेंलो | lit (Channel switched on, channel load > 80% ) |
| डाइलेक्ट्रिक शक्ति | 35 V DC (Load circuit) |
| आयामी रेखाचित्र | |
| प्रतिक्रिया प्रतिरोध | max. 35 V DC |
| पदहरूको संख्या | 1 |
| मूल्याङ्कन गरिएको वृद्धि भोल्टेज | 0.5 kV |
| सुरक्षाको डिग्री | IP20 |
| अधिकतम क्यापेसिटिभ लोड | ≤ 75000 µF (Depending on the current setting and the short-circuit current available) |
| आवश्यक ब्याकअप फ्यूज | Only required if Imaxof the power supply > the short-circuit switching capacity. Integrated failsafe element. |
| तापक्रम घटाउने | 20 A (Total current at 40°C) |
| च्यानल एलईडी रातो-हरियो | flashing (Channel switched off, programming mode active, current adjustment after overload or short-circuit release) |
| सहिष्णुता मापन I | ± 10 % (typ.) |
| कम्पन (सञ्चालन) | 5g (10 ... 150 Hz / 10 cycles / axis / X, Y, Z) |
| च्यानल एलईडी रातो-पहेंलो | flashing (Channel is overloaded and is switched off) |
| ओभरभोल्टेज स्विच-अफ | ≥ 32.5 V DC (active) |
| कम भोल्टेज स्विच-अफ | ≤ 8.5 V DC (active) |
| मापदण्ड/विशिष्टताहरू | EN 61000-6-2 |
| सक्रिय वर्तमान सीमा | typ. 2.0 x INat IN≤ 3 A |
| बन्द सर्किट धारा I0 | typ. 25 mA (no load at 24 V) |
| MTBF (IEC 61709, SN 29500) | 11140621 h (at 25 °C with 21 % load) |
| कन्डक्टर क्रस सेक्सन AWG | 24 ... 12 |
| मूल्याङ्कन गरिएको वर्तमान (पूर्व-समायोजित) | 2 A |
| कन्डक्टर क्रस सेक्सन कडा | 0.2 mm² ... 4 mm² |
| परिवेशको तापक्रम (सञ्चालन) | -30 °C ... 65 °C (The temperature range of the power module must be taken into consideration) |
| कन्डक्टर क्रस सेक्सन लचिलो | 0.2 mm² ... 4 mm² |
| सर्ट-सर्किट स्विचिङ क्षमता | 300 A |
| UL ९४ अनुसार ज्वलनशीलता मूल्याङ्कन | V-0 |
| परिवेशको तापक्रम (भण्डारण/परिवहन) | -40 °C ... 70 °C |
| कन्डक्टर क्रस सेक्सन, लचिलो, फेरुल सहितको, प्लास्टिक स्लिभ सहितको | 0.25 mm² ... 4 mm² |
| कन्डक्टर क्रस सेक्सन लचिलो, प्लास्टिक स्लिभ बिनाको फेरुल सहित | 0.25 mm² ... 4 mm² |
प्राविधिक विशिष्टताहरू र प्रदर्शन डेटा
स्थापना र सञ्चालन मार्गनिर्देश